Español Français English EMERSON AND THE G-CLEF LOGO ARE REGISTERED TRADEMARKS OF EMERSON RADIO CORP., PARSIPPANY, NEW JERSEY, U.S.A. LC220EM1 LC190EM1 EN Owner's manual Need help? FR Manuel du propriétaire Besoin d’aide? Please call toll free or visit our web site below Appelez notre numéro gratuit ou visitez notre site web à l’adresse ES Manual del propietario ¿Necesita ayuda? Llame por favor sin costo ó visite nuestro sitio web en 1-866-309-8819 www. emersonaudiovideo.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE. APPARATUS SHALL NOT BE EXPOSED TO DRIPPING OR SPLASHING AND NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE APPARATUS.
English FCC WARNING This apparatus may generate or use radio frequency energy. Changes or modifications to this apparatus may cause harmful interference unless the modifications are expressly approved in the manual. The user could lose the authority to operate this apparatus if an unauthorized change or modification is made. RADIO-TV INTERFERENCE This apparatus has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
INTRODUCTION Features Contents Important Safety Instructions Trademark Information 2 3 INTRODUCTION Features Supplied Accessories Symbols Used in this Manual Attaching the Base Fixing the Unit on Your Furniture Control Panel Terminals Remote Control Function Installing the Batteries 4 5 5 5 5 6 7 8 8 PREPARATION Antenna Connection Connection to Cable Receiver or Satellite Box External Device Connection Plug In the AC Power Cord Initial Setup 9 9 10 14 15 WATCHING TV Switching Each Input Mode Sleep T
English Owner’s manual (1EMN25819) Quick Start (1EMN25820) Attaching the Base You must attach the base to the unit to have it as a table top unit. Be sure the front and rear of the base match the proper direction. 1 FREEZE FORMAT ECO OK MENU INFO SAP VOL 1 MUTE CH 3 5 6 7 8 9 PREV CH 0 . 3 Batteries (AAA, 1.
Control Panel 1 POWER 2 CHANNEL ▲/▼ ➠ ➠ p.15 p.17 ➠ ➠ p.19 p.16 Press to select channels or move up (▲) / down (▼) through the main menu items. 3 MENU 4 VOLUME / Press to adjust the volume or move right ( ) / left ( ) through the main menu items. 7 6 5 MENU Receives infrared rays transmitted from the remote control. 6 POWER ON indicator STAND BY POWER ON VOLUME 5 Infrared sensor window CHANNEL POWER Lights up green when power is on. 7 STAND BY indicator Lights up red when power is off.
English 11 PREPARATION * TERMINAL Side Panel 8 HDMI 2 Input jack ➠ p.10, 11 9 S-Video / Composite video / Audio (L/R) Input jacks for VIDEO ➠ p.11, 12 10 Headphone Audio Output jack INTRODUCTION Terminals Headphone connection for personal listening. 12 13 14 HEAD PHONE 10 15 16 18 TROUBLESHOOTING 17 Rear Panel 11 Antenna Input jack ➠ p.9 12 AC power cord ➠ p.14 13 PC (VGA) Input jack ➠ p.13 14 HDMI 1 Input jack ➠ p.9, 10 15 Component video and Audio (L/R) Input jacks ➠ p.
Remote Control Function 1 2 11 SOURCE SLEEP FREEZE BACK FORMAT ECO 3 4 12 13 14 OK MENU 5 6 7 1 2 3 INFO 15 16 SAP VOL MUTE CH 17 8 1 2 3 4 5 6 7 8 9 PREV CH 0 . 9 10 4 5 6 7 8 9 10 11 12 13 14 15 16 17 SOURCE ➠ p.16 SLEEP ➠ p.16 BACK ➠ p.18 Press to return to the previous menu operation. ▲/▼/◄/►(cursor) ➠ p.15 MENU ➠ p.19 OK ➠ p.15 VOL / ➠ p.16 MUTE ➠ p.16 Number buttons ➠ p.17 • (dot) Press to shift the subchannel from the main channel. PREV CH ➠ p.
English No supplied cables are used with these connections: Before you connect: Be sure your antenna or other device is connected properly before plugging in the AC power cord. Use an HDMI or component video cables to connect the HDMI or the Component Video Input jacks of the unit to the HDMI or the component video output jacks of the cable receiver / satellite box.
No supplied cables are used with these connections: Please purchase the necessary cables at your local store. High Speed HDMI cable (also known as HDMI category 2 cable) is recommended for the better compatibility. HDMI-DVI Connection Use an HDMI-DVI conversion cable to connect the unit to external video devices equipped with DVI output jack. e.g.
English S-Video Connection Component Video connection offers better picture quality for video devices connected to the unit. If you connect to the unit’s Component Video Input jacks, connect audio cables to the Audio L/R Input jacks right beside the Component Video connector. S-Video connection offers good picture quality for video devices connected to the unit. If you connect to the unit’s S-Video Input jack, connect audio cables to the Audio L/R Input jacks right beside the Composite Video connector. e.
No supplied cables are used with these connections: Please purchase the necessary cables at your local store. Composite Video Connection Composite Video connection offers standard picture quality for video devices connected to the unit. If you connect to the unit’s Composite Video Input jack, connect audio cables to the Audio L/R Input jacks right beside the Composite Video connector. When the audio jack of the video device is monaural, connect an audio cable to the Audio L Input jack.
English e.g.) rear of this unit PREPARATION This unit is equipped with a PC input jack. If you connect this unit to your PC, you can use this unit as a PC monitor. Use an VGA cable for this connection and it requires stereo mini plug audio cable as well. If you connect this unit to your PC, you can use this unit as a PC monitor. INTRODUCTION PC Connection WATCHING TV VGA cable VGA cable should be with ferrite core.
Plug In the AC Power Cord Make sure that the AC power cord must be plugged to an AC outlet after all the necessary connections are completed. rear of this unit o cm ede.tpl AC outlet AC power cord Caution: • Do not connect the AC power cord to a power supply outside the indicated voltage of this unit (AC 120V). Connecting the AC power cord to a power supply outside of this range may result in fire or electrical shocks.
English 4 Use ◄/► to select the desired location setting, then press OK. Initial Setup Initial Setup Select “Retail” or “Home” for your location. Before you begin: Make sure the unit is connected to antenna or cable. After making all the necessary connections, press to turn on the unit. Use ▲/▼ to select [Antenna] for TV channels or [Cable] for CATV channels, then press OK. Antenna Make sure the antenna is connected to ''ANT. IN'' jack. Select your signal source.
WATCHING TV Switching Each Input Mode can easily switch with the remote control between TV (ATSC or NTSC) and external devices when they are connected to the unit. Press SOURCE or CH K repeatedly to cycle through the input modes. e.g.) Source 11.1 TV Video Component HDMI1 HDMI2 PC • Video Component DTV /TV channel SOURCE PC HDMI3 HDMI2 SLEEP HDMI1 FREEZE BACK Pressing CH L reverses the direction of the input modes.
English INTRODUCTION Freeze Mode can freeze the image shown on the TV screen for 5 minutes. Press FREEZE to freeze the image. Freeze • The sound output will not be paused. • To cancel freeze mode, press any buttons except y. 5 types of display modes can be selected when the broadcasting station is sending 16:9 or 4:3 video signal. And 3 types of display modes can be selected for PC input signal. Press FORMAT repeatedly to switch the TV aspect ratio. Normal displays a 16:9 picture at its original size.
TV Screen Information Reducing the Brightness You can display the currently selected channel or other information such as the audio mode on the TV screen. In the digital mode, the detailed broadcasting information for the current channel such as program title, program guides are displayed. Backlight brightness can be reduced which may save on power consumption more than you just set [On] in [Energy Saving Mode]. ➠ p.31 Press INFO. Press ECO Press ECO once to reduce the brightness.
English Main Menu Press MENU. Picture Sound Features Before you begin: Make sure the unit is connected to antenna or cable. 1 2 3 4 Press MENU to display the main menu. Use ▲/▼ to select [Setup], then press OK. Use ▲/▼ to select [Autoprogram], then press OK. Use ▲/▼ to select an appropriate option, then press OK. Autoprogram Language Picture Sound Antenna Cable Setup Antenna Features Language Cable Or ANT.IN • When connected to VHF / UHF antenna, select [Antenna].
Channel List Add Channels The channels selected here can be skipped when selecting the channels using CH ▲/▼. Those channels can still be selected with the Number buttons. This function lets you add the channels that were not added by the autoprogram due to reception conditions at the initial setting. 1 2 3 4 1 2 3 4 Press MENU to display the main menu. Use ▲/▼ to select [Setup], then press OK. Use ▲/▼ to select [Channel List], then press OK.
English Language Selection ATSC This function lets you check the digital signal strength of each channel. 1 2 3 Press MENU to display the main menu. Use ▲/▼ to select [Setup], then press OK. Use ▲/▼ to select [Antenna], then press OK. Press MENU to display the main menu. Use ▲/▼ to select [Language], then press OK. Use ▲/▼ to select [English], [Español] or [Français], then press OK. Use the Number buttons or CH ▲/▼ to select the channel for which you want to check the digital signal strength.
Picture Adjustment Sharpness You can adjust picture mode, or customize the picture quality as your preference. Before you begin: Press MENU to display the main menu. Use ▲/▼ to select [Picture], then press OK. Use ▲/▼ to select the item you want to adjust, then press OK. Picture Picture Picture Mode Sound Setup Personal Brightness 30 Contrast 60 Color 36 Tint Features 0 Sharpness 0 Color Temperature Language 4 Normal Adjust the following items.
English Before you begin: You must set [Home] in [Location]. ➠ p.31 Otherwise, the settings you adjusted will not be memorized after you turn off the unit. TV Speakers Press MENU to display the main menu. Picture Use ▲/▼ to select [Sound], then press OK. Sound Setup Use ▲/▼ to select the item you want to adjust, then press OK. Features Language Sound Picture Sound Mode On "On": Sound will be output from the TV speakers. "Off": Sound will not be output from the TV speakers. "Ext.
Closed Caption A. Caption Service You can view closed captioning (CC) for TV programs, movies and news. Closed caption refers to text of dialogue or descriptions displayed on-screen. 1 2 3 4 5 Use ▲/▼ to select [Caption Service], then press OK. Use ▲/▼ to select the desired closed caption, then press OK. Press MENU to display the main menu. Closed Caption Use ▲/▼ to select [Features], then press OK. Picture Use ▲/▼ to select [Closed Caption], then press OK.
English C. Caption Style ATSC ATSC You can change the caption style such as font, color or size, etc. 4 4 Use ▲/▼ to select [Caption Style], then press OK. 5 Use ▲/▼ to select [User Setting], then press OK. 5 Use ▲/▼ to select [Digital Caption Service], then press OK. Use ▲/▼ to select the desired digital caption service, then press OK.
Font Style Closed Captioning font style can be changed as illustrated. Background Opacity Closed Caption Background opacity of the displayed caption can be switched as illustrated. Closed Caption Solid Flash Translucent Transparent Font Size Font size of the displayed caption can be switched as illustrated. Edge Color Closed Caption Edge color of the displayed caption can be switched as illustrated.
English A. Channel Lock Child lock reads the ratings for programs, then denies access to the programs which exceed the rating level you set. With this function, you can block certain programs inappropriate for children and any channels or external input modes can be invisible. Press MENU to display the main menu. 5 6 Use ▲/▼ to select [Features], then press OK. Use ▲/▼ to select [Channel Lock] k , then press OK.
C. Setting TV ratings 5 6 D. Change PIN Use ▲/▼ to select [US TV Ratings Lock] k , then press OK. Use ▲/▼ / ◄/► to select the desired rating, then press OK K repeatedly to switch between [View] and [Block] k. US TV Ratings Lock Picture FV V S L Although the default PIN code (0000) is supplied with the unit, you can set your own PIN code.
English Clock, Phase Use ◄/► to adjust [Clock] setting to stabilize the PC screen and [Phase] setting to improve the clarity of the PC screen. This function lets you adjust the PC screen position, clock and phase during PC input. Press MENU to display the main menu. Cursor s Use ▲/▼ to select [Features], then press OK. Clock Use ▲/▼ to select [PC Settings], then press OK. Clock Use ▲/▼ to select the setting you want to adjust, then press OK.
Fun-Link Auto TV On This unit will turn on detected when the power on signal is sent from your connected Fun-Link device. Use ▲/▼ to select the desired setting, then press OK. This function allows you to operate the linked functions between our brand devices with a Fun-Link feature and this unit connecting through an HDMI cable. 1 2 3 Auto TV On Press MENU to display the main menu. Picture Use ▲/▼ to select [Features], then press OK. Sound Use ▲/▼ to select [Fun-Link], then press OK.
English Current Software Info You can set whether the power consumption is saved or not. This function shows what version of the software currently used. Press MENU to display the main menu. Use ▲/▼ to select [Features], then press OK. Use ▲/▼ to select [Energy Saving Mode], then press OK. Use ▲/▼ to select the desired mode, then press OK. 4 Energy Saving Mode Picture Setup Press MENU to display the main menu. Use ▲/▼ to select [Features], then press OK.
TROUBLESHOOTING Troubleshooting Guide If the unit does not perform properly when operated as instructed in this manual, check the followingg chart and all connections once before callingg for service. Symptom No power Control button does not work. Power is ON but no screen image. Remedy • • • • • • • • • • • • • No picture or sound • • • • • • Press only one button at a time. Do NOT press more than one button at the same time. Ensure that no buttons on the remote are depressed and move freely.
English INTRODUCTION You see "noise" or "trash" on the screen. You switch to a different input and the volume changes. • View other TV channels. The problem might be limited to the broadcasting station, missing data or pixelation. • • This unit will memorize the volume level from the last time you adjusted it. If the volume of the sound from another device is higher or lower, then the loudness will change.
FAQ Question Answer • • • • My remote control does not work. What should I do? • • • • • How come the Initial setup appears every time I turn on this unit? Why I cannot watch some RF signal TV programs. • • Connect the RF coaxial cable to the unit directly and run the initial setup. Make sure to complete the channel scan before turning off the unit. • • Make sure [[Autoprogram] p g ] has been completed. p ➠ pp.
English Glossary Cabinet Cleaning • ATSC Aspect Ratio The width of a TV screen relative to its height. Conventional TVs are 4:3 (in other words, the TV screen is almost square); widescreen models are 16:9 (the TV screen is almost twice as wide as its height). This is a video signal format that conveys each of 3 principal colors of light (red, blue and green) through different signal lines. This allows the viewers to experience picture colors as original as it is.
General Specifications TV format ATSC / NTSC-M TV standard Closed caption system §15.122 / FCC (digital CC) §15.119 / FCC (analog CC) Channel coverage (ATSC / NTSC) Terrestrial DTV (ATSC) VHF 2~13 UHF 14~51 each channel has e.g.) 2.1~2.9, 3.1~3.9, etc.
English Replacement product can only be sent if all warranty requirements are met. Failure to follow all requirements can result in delay. to any hardware product or any software, even if packaged or sold with the product, as manufacturers, suppliers, or publishers may provide a separate warranty for their own products packaged with the bundled product.
