Specifications

1592032000 iProCHILL_4DIN GB r.1.0 20.01.2012 iProCHILL 4 DIN series 3/48
1. IMPORTANT RECOMMENDATIONS
 The symbol alerts the user of non-insulated “dangerous voltage” within the product area that
is sufficiently high to constitute a risk of electric shock to persons.
 The symbol alerts the user of important operating and maintenance (assistance) instructions
found in the documentation attached to the device.
 Dixell Srl cannot accept any liability for damages caused by modems that are not supported. Dixell
Srl reserves the right to modify this manual without prior notice. The documentation can be
downloaded from www.dixell.com even prior to purchase.
 Dixell Srl reserves the right to change the composition of its products, even without notice, ensuring
the same and unchanged functionality.
 This manual forms part of the product and must always be kept near the device for easy and quick
reference. The device cannot be used as a safety device. Verify the limits of application before using
the device.
 Verify that the power supply voltage is correct before connecting the device. Do not expose it to
water or humidity: use the controller only within the operating limits, avoiding sudden changes in
temperature and high atmospheric humidity in order to prevent condensation from forming.
Recommendation: disconnect all the electric connections before performing any maintenance.
Insert the probe where it cannot be reached by the End User. The device must not be opened.
Consider the maximum current that can be applied to each relay. Make sure that the wires for
the probes, the loads and the electrical power supply are separated and sufficiently distant from
each other, without crossing or intertwining with each other. In the case of applications in
industrial environments, it may be useful to use the main filters (our mod. FT1) in parallel to the
inductive loads.
 The customer shall bear full responsibility and risk for product configuration in order to achieve the
results pertaining to installation and/or final equipment/system. Upon the customer's request and
following a specific agreement, Dixell s.r.l. may be present during the start-up of the final
machine/application, as a consultant, however, under no circumstances can the company be held
responsible for the correct operation of the final equipment/system.
 Since Dixell products form part of a very high level of technology, a
qualification/configuration/programming/commissioning stage is required to use them as best
as possible. Otherwise, these products may malfunction and Dixell cannot be held
responsible. The product must not be used in any way that differs from that stipulated in the
documentation.
 The device must always be inserted inside an electrical panel that can only be accessed by
authorised personnel. For safety purposes, the keyboard must be the only part that can be
reached.
 The device must never be hand-held while being used.