Instruction manual

1
BEFORE YOU BEGIN
This quick reference guide explains basic installation guidelines for
Micro Motion
®
Model D600 sensors. For detailed information, refer to
the instruction manual that was shipped with the sensor.
European installations
This Micro Motion product complies with all applicable European
directives when properly installed in accordance with the instructions in
this quick reference guide. Refer to the EC declaration of conformity for
directives that apply to this product.
The EC declaration of conformity, with all applicable European
directives, and the complete ATEX Installation Drawings and Instructions
are available on the internet at www.micromotion.com/atex or through
your local Micro Motion support center.
INTRODUCTION
The sensor and booster amplifier make up one part of a Coriolis
flowmeter. The other part is a transmitter.
Installation options
The sensor and booster amplifier are available in any of the
configurations described in Table 1. Table 1 also lists the transmitters that
can be used with each configuration.
©2003, Micro Motion, Inc. All rights reserved. Micro Motion is a registered trademark of Micro Motion, Inc. The Micro
Motion and Emerson logos are trademarks of Emerson Electric Co. All other trademarks are property of their respective
owners.