Quick Start Guide

25 IC695CPL410 Rackless CPU w/Field Agent Quick Start Guide GFK-3053C
PROFINET Controller Configuration
An Embedded PROFINET Controller may be configured on LAN2. To enable
the PROFINET Controller in a CPL410 project, select the CPL410 target in
the PME Navigator (Figure 10) and open the Hardware Configuration. On the
Settings tab, change the designated LAN Mode of the selected port to
PROFINET. The PROFINET Controller node description then displays that a
PROFINET node exists on the selected LAN (under the CPL410). For further
details, refer to the PACSystems RX3i PROFINET IO Controller User Manual,
GFK-2571.
Figure 10: PME Navigator Showing PROFINET Node on LAN2