Cut Sheet

VersaMax I/OIndustrial I/O
3.25
www.ge-ip.com
GE Intelligent Platforms Control Systems Solutions
Analog Input Modules
Analog input modules receive signals from current and voltage input devices. Modules require a
carrier base (IC200CHSxxx).
IC200ALG230 IC200ALG240 IC200ALG260 IC200ALG261
Product Name
VersaMax Analog Input Module,
12 Bit Voltage/Current,
4 Channels
VersaMax Analog Input Module,
16 Bit Voltage/Current Isolated,
8 Channel
VersaMax Analog Input Module,
12 Bit Voltage/Current,
8 Channel
VersaMax Analog Input Module,
15 Bit Differential Voltage,
8 Channel
Lifecycle Status Active Active Active Active
Input Range ±10 VDC or 0-10 VDC ±10 VDC, 4-20 mA 4-20mA, ±10 VDC or 0-10 VDC ±10 VDC
Number of Channels 4 8 Channel to channel isolated 8 8
External Power Supply
None Range: 19.5-30 VDC including
ripple; Current consumption: 100
mA maximum plus load currents
None None
Resolution
Bipolar mode: 2.5 mV = 8 counts,
Unipolar mode: 2.5 mV = 8 counts
Current mode: 381 nA nominal
Voltage mode: 381 µV nominal
Current mode: 4 µA = 8 counts,
Bipolar mode: 2.5 mV = 8 counts,
Unipolar mode: 2.5 mV = 8 counts
Bipolar mode: 0.3125 mV =
1 counts
Update Rate
0.4 ms Approximately 20 mS max. @
50 Hz filter frequency
Approximately 16.7 mS max. @
60 Hz filter frequency
0.4 ms 7.5 ms
Accuracy at 25°C
±0.3% typical of full scale,
±0.5% maximum of full scale
±0.1% maximum of full scale ±0.3% typical of full scale,
±0.5% maximum of full scale
±0.3% typical of full scale,
±0.5% maximum of full scale
Input Impedance
Voltage mode:
126 kOhms maximum,
Current mode:
200 Ohms maximum
N/A Voltage mode:
126 kOhms maximum,
Current mode:
200 Ohms maximum
Voltage mode:
100 kOhms maximum
Input Filter Response 5.0 ms N/A 5.0 ms N/A
5V Backplane Current
Consumption (mA)
125 maximum 15 maximum 130 maximum 200 maximum
3.3V Backplane Current
Consumption (mA)
N/A 120 maximum N/A N/A
LED Indicators
INT PWR LED indicates
internally-generated field power
is present. OK LED indicates
backplane power is present.
FLD PWR LED indicates the
presence of both logic power
and user power. OK LED
indicates module status.
INT PWR LED indicates
internally-generated field power
is present. OK LED indicates
backplane power is present.
INT PWR LED indicates
internally-generated field power
is present. OK LED indicates
backplane power is present.
Dimensions (W x H x D)
110 mm (4.3 in) x 66.8 mm (2.63 in) x
50 mm (1.956 in), not including the
height of the carrier or the
mating connectors
110 mm (4.3 in) x 66.8 mm (2.63 in) x
50 mm (1.956 in), not including the
height of the carrier or the
mating connectors
110 mm (4.3 in) x 66.8 mm (2.63 in) x
50 mm (1.956 in), not including the
height of the carrier or the
mating connectors
110 mm (4.3 in) x 66.8 mm (2.63 in) x
50 mm (1.956 in), not including the
height of the carrier or the
mating connectors