Datasheet

Power And Control For
Continuous System Protection
On-line UPS power protection — plus complete monitoring and
communications capabilities - give your Foundation system the highest
level of intelligent operation.
Power protection and battery back-up
State-of-the-art power protection is available in the Foundation integration system
through the addition of a Liebert GXT 2U on-line uninterruptible power supply
(UPS) system. As a true on-line UPS, the GXT 2U includes power factor
correction, internal batteries, external battery connectibility, and internal automatic
and manual bypass capability. An additional battery pack for extra battery runtime
is also offered. The UPS and battery pack are mounted inside the enclosure
with a mounting bracket for support and relocation as required.
Monitoring and communications
Complete monitoring and communications capability can be built into the
Foundation system through the use of the Liebert SiteNet Integrator. It is available
in Ethernet version and can be enhanced with optional input sensors. These
sensors include internal and external temperature and humidity, door sensor,
high temperature alarm, smoke detector and water detection. For enhanced
UPS communications and control, the Intellislot SNMP/Web Card will deliver
SNMP and web-management communications capability to the GXT 2U unit
contained in your Foundation system.
This feature will provide flexibility in how you monitor and control your UPS
over the network.
Remote Power Control
The Load Control Module (LCM) is offered as an installed, add-on package to
the Ethernet SiteNet Integrator. With the LCM, you can conduct remote
shutdowns and cold restarts automatically. The LCM provides remote power
management of up to six pieces of connected equipment. With the LCM, you
can cycle power to reboot equipment or turn off connected systems by direct
control or shut down based on pre-set alarm conditions.