Troubleshooting guide

83
Reference Manual
00809-0100-4308, Rev BA
Section 6: Service and Troubleshooting
December 2014
Service and Troubleshooting
6.4 Service and troubleshooting tools
This section briefly describes tools and functions in the AMS Wireless Configurator and Field
Communicator which may be useful for service and troubleshooting of Rosemount 3308 Series
Transmitter.
6.4.1 Reading the Echo Curve
The AMS Wireless Configurator and Field Communicator have powerful tools for advanced
troubleshooting. By using the Echo Curve function you get a view of the tank signal.
Measurement problems can be solved by studying the position and amplitude of the different
peaks.
To read the echo curve, do the following:
1. From the Home Screen, go to Service Tools > Echo Tuning > Echo Curve.
2. AMS Wireless Configurator: In the dialog box, click Next > to start reading the echo
curve. The reading may take several minutes.
Field Communicator: Click Echo Curve and follow the on-screen instructions. The
reading may take several minutes.
Figure 6-2. Echo Curve Plot in AMS Wireless Configurator
Interface Peak
Product
Surface Peak
Reference Peak