Troubleshooting guide

63
Reference Manual
00809-0100-4308, Rev BA
Section 5: Operation
December 2014
Operation
5.2 Device display screen messages
The device display can be used to present different variables and a diagnostic screen sequence.
5.2.1 Variable screens
If the Display Mode is set to Periodic, the device display shows a periodic sequence of
user-chosen variables during operation. A new screen appears according to configured wireless
update rate. The device display will also show ALERT PRESNT if at least one alert is present. For
information on how to configure the device display, see “Device Display” on page 165.
The Rosemount 3308 Series Transmitter can display the following variables.
Percent of Range Level Distance
Total Volume Interface Distance Interface Level
Upper Product Thickness Electronics Temperature
Supply Voltage
Signal Quality