Troubleshooting guide

58
Reference Manual
00809-0100-4308, Rev BA
Section 4: Configuration
December 2014
Configuration
4.6.2 Basic Setup
All Basic Setup parameters are described in the section “Configuration parameters” on
page 160.
Figure 4-14. Guided Setup Screen
1. From the Home screen, select Configure.
2. Go to Guided Setup > Initial Setup.
3. Click Basic Setup, and follow the instructions.
4.6.3 Optional Setup
Consider Optional Setup such as Volume, Device Display, Echo Tuning, and Check Level
Response, found in the Guided Setup. Run Check Level Response to review the maximum level
change between updates with the current configuration.
1. From the Home screen, select Configure.
2. Go to Guided Setup > Optional Setup.
3. Click the selected Optional Setup, and follow the instructions.
Additional configuration parameters are available in the Manual Setup menu. For further
information about the parameters see “Configuration parameters” on page 160.