Troubleshooting guide

49
Reference Manual
00809-0100-4308, Rev BA
Section 4: Configuration
December 2014
Configuration
7. Secondary Variable 8. Electronics Temperature 9. Supply Voltage
Measurement value of
mapped Second Variable.
Temperature value of device
electronics.
Voltage reading of the Power
Module.
10. Percent of Range 11. Active Alert Present
Level value in percent of
total measurement range.
This screen will only appear if
there is at least one Active Alert
present. For detailed information
of the failure source and
recommended actions, go to the
Active Alerts screen in AMS
Wireless Configurator or Field
Communicator. Refer to “Check
Device Status” on page 67.
Some Active Alerts will be
displayed on the LCD display as
part of the diagnostic button
screen sequence, refer to
“Diagnostic button screen
sequence” on page 64.
> 6 V Good
5.2 V – 6.0 V Low
< 5.2 V Very low