Troubleshooting guide

47
Reference Manual
00809-0100-4308, Rev BA
Section 4: Configuration
December 2014
Configuration
4.4.2 Field Communicator
This section describes how to prepare the Field Communicator to communicate with a
Rosemount 3308 Series Transmitter. The Field Communicator can be used to configure the
device with a point-to-point connection. Connect the leads on the Field Communicator to the
communication terminals of the device as shown in Figure 4-3.
Figure 4-3. Connect Point-to-Point using a Field Communicator
An overview of the Field Communicator is shown in Figure 4-4. For information on all the
capabilities, refer to the Field Communicator Product Manual (document number
00809-0100-4276).
Figure 4-4. 475 Field Communicator
Get the latest Device Descriptor (DD)
If the Rosemount 3308 Series DD is not included in your 475, then use the Easy Upgrade Utility
to update the Field Communicator with the latest DD. See the Field Communicator Product
Manual (document number 00809-0100-4276) for more information on how to update the
device descriptors.
123
456
78
0
9
Communication
terminals
F
E
D
G
A
C
B
A. Power key
B. Navigation keys
C. Tab key
D. Backlight key
E. Enter key
F. Function key
G. Alphanumeric keypad