Troubleshooting guide

46
Reference Manual
00809-0100-4308, Rev BA
Section 4: Configuration
December 2014
Configuration
Get the latest Device Descriptor (DD)
The Device Descriptor (DD) is a configuration tool that is developed to assist the user through
the configuration.
The Rosemount 3308 Series DD is typically installed together with AMS Wireless Configurator.
To download the latest HART DD, visit the Emerson Process Management Device Install Kit site
at: www.emersonprocess.com/devicefiles
After downloading, add the DD to AMS Wireless Configurator:
1. Close AMS Wireless Configurator.
2. Go to Start > Programs > AMS Device Manager and select Add Device Type.
3. Browse to the downloaded DD files and click Ok.
4. In the Add Device Type application, click the Help button for more information on how
to complete this operation.
Configure the HART modem interface
Before connecting to the device using a HART modem, the HART modem interface must be
configured in AMS Wireless Configurator:
1. Close AMS Wireless Configurator.
2. Go to Start > Programs > AMS Device Manager and select Network Configuration.
3. Click Add.
4. In the drop down list, select HART modem and click Install.
5. Follow the instructions. In the Network Configuration application, click the Help
button for more information on how to complete this operation.
Configure the wireless network interface
Before connecting to the device wirelessly using a Smart Wireless Gateway, the wireless
network must be configured in AMS Wireless Configurator:
1. Close AMS Wireless Configurator.
2. Go to Start > Programs > AMS Device Manager and select Network Configuration.
3. Click Add.
4. In the drop down list select Wireless Network and click Install.
5. Follow the instructions. In the Network Configuration application, click the Help
button for more information on how to complete this operation.