Troubleshooting guide

45
Reference Manual
00809-0100-4308, Rev BA
Section 4: Configuration
December 2014
Configuration
4.4 Get started with your preferred configuration
tool
4.4.1 AMS Wireless Configurator (version 12.0 or later is required)
The AMS Wireless Configurator is the recommended software tool for the wireless network
devices, and is supplied with the Smart Wireless Gateway. Refer to the AMS Wireless
Configurator Manual Supplement (document number 00809-0400-4420) for further
information.
Configuration can be done by connecting to the wireless network devices either point-to-point
using a HART
®
modem as shown in Figure 4-1, or wirelessly through the gateway as shown in
Figure 4-2. Initial configuration to join a device to the wireless network must be done
point-to-point.
Figure 4-1. Connect Point-to-Point using HART Modem
Figure 4-2. Connect Wirelessly through Smart Wireless Gateway
Communication
terminals
Smart Wireless Gateway