Troubleshooting guide

31
Reference Manual
00809-0100-4308, Rev BA
Section 3: Installation
December 2014
Installation
Figure 3-9. Flexible Twin/Single Lead Probe with Weight and Magnet
3.5.2 Rigid single lead probe
The rigid single lead probe can be guided by a tube welded on the tank bottom. Tubes are
customer supplied. Make sure that the probe can move freely in order to handle thermal
expansion. The measurement accuracy will be reduced close to the tube opening.
Figure 3-10. Rigid Single Lead Probe with Tube
3.5.3 Coaxial probe
The coaxial probe can be secured to the tank wall by fixtures fastened to the tank wall. Fixtures
are customer supplied. Make sure the probe can move freely due to thermal expansion without
getting stuck in the fixture.
Magnet
Drain