Troubleshooting guide

16
Reference Manual
00809-0100-4308, Rev BA
Section 3: Installation
December 2014
Installation
3.2 Installation procedure
Follow these steps for proper installation:
GROUND THE DEVICE
INSTALL THE POWER
MODULE
POSITION THE ANTENNA
UTILIZE THE DISPLAY
Threaded Tank
Connection
REVIEW MOUNTING
CONSIDERATIONS
REVIEW MOUNTING
PREPARATIONS
MOUNT DEVICE ON
TANK
Measure Tank Height
Shorten the Probe
Mount a Centering disc
for Pipe Installations
Tank Connection with
Flange
Tank Connection with
Loose Flange
(“plate design”)
ANCHOR THE PROBE
Recommended
Mounting Position
Flange Connection on
Nozzles
Non-metallic tanks
Tank Connection with
Tri-Clamp
™
Optional