Troubleshooting guide

168

Reference Manual

00809-0100-4308, Rev BA

Appendix D: Configuration Parameters

December 2014

Configuration Parameters

D.3.3 Manual Setup - Level

Probe

Power Mode Configures the device to take periodic measurements to

conserve battery life, or to take continuous measurements.

Note

Always On mode is only recommended for devices connected

to line power.

Power Source Optimizes the device to make use of the power source to

which it is attached.

Weight Type Type of weight at the end of the probe. Only applicable to the

Flexible Single Lead probe type.

Weight Type Option

Code

Description

Unknown Default

Small W1

Short W2

Heavy W3

Chuck

(anchored)

5.5 in (140 mm)

Ø 0.9 in (22 mm)

2 in (50 mm)

Ø 1.5 in (38 mm)

5.5 in (140 mm)

Ø 1.5 in (38 mm)