Troubleshooting guide

164
Reference Manual
00809-0100-4308, Rev BA
Appendix D: Configuration Parameters
December 2014
Configuration Parameters
D.3.2 Manual Setup - Device
Wireless - Network
Typical Interface Condition The typical interface condition in the tank.
Select one of the following conditions:
Network ID Identification number that tells the device which network it
belongs to. Obtained from the network administrator.
Join Key A kind of password that the device uses to join the network.
Obtained from the network administrator. All sections must
contain the same number of characters.
Typical Interface
Condition
Description
Unknown or Other
condition
The typical interface condition is
unknown, or varies in such a way
that no typical interface condition
can be stated.
Layer on top (thin) The interface thickness is typically
thin compared to the bottom
layer. The tank mostly contains the
bottom product.
Layer at the bottom
(thin)
The interface thickness is typically
thick compared to the bottom
layer. The tank mostly contains the
upper product.