Troubleshooting guide

130
Reference Manual
00809-0100-4308, Rev BA
Appendix A: Reference Data
December 2014
Reference Data
Table A-13. Accessories Ordering Information
The starred options (★) represent the most common options and should be selected for best delivery. The non-starred offerings
are subject to additional delivery lead time.
Process connection - size/type (consult the factory for other process connections)
Centering discs
(1)(2)
(see page 118 for dimensions and size recommendation)
Outer diameter
03300-1655-1001 Kit, 2-in. Centering disc, SST, Single Flex Lead 1.8 in. (45 mm)
★
03300-1655-1002 Kit, 3-in. Centering disc, SST, Single Flex Lead 2.7 in. (68 mm)
★
03300-1655-1003 Kit, 4-in. Centering disc, SST, Single Flex Lead 3.6 in. (92 mm)
★
03300-1655-1006 Kit, 2-in. Centering disc, PTFE, Single Flex Lead 1.8 in. (45 mm)
★
03300-1655-1007 Kit, 3-in. Centering disc, PTFE, Single Flex Lead 2.7 in. (68 mm)
★
03300-1655-1008 Kit, 4-in. Centering disc, PTFE, Single Flex Lead 3.6 in. (92 mm)
★
03300-1655-1004 Kit, 6-in. Centering disc, SST, Single Flex Lead 5.55 in. (141 mm)
03300-1655-1005 Kit, 8-in. Centering disc, SST, Single Flex Lead 7.40 in. (188 mm)
03300-1655-1009 Kit, 6-in. Centering disc, PTFE, Single Flex Lead 5.55 in. (141 mm)
03300-1655-1010 Kit, 8-in. Centering disc, PTFE, Single Flex Lead 7.40 in. (188 mm)
Vented flanges
(3)
03300-1812-0092 Fisher 249B/259B
(4)
03300-1812-0093 Fisher 249C
03300-1812-0091 Masoneilan
Flushing connection rings
DP0002-2111-S6 2 in. ANSI, ¼ in. NPT connection
DP0002-3111-S6 3 in. ANSI, ¼ in. NPT connection
DP0002-4111-S6 4 in. ANSI, ¼ in. NPT connection
DP0002-5111-S6 DN50 ¼ in. NPT. connection
DP0002-8111-S6 DN80 ¼ in. NPT. connection
Other
03300-7004-0001 MACTek
®
Viator
®
HART Modem and cables (RS232 connection)
★
03300-7004-0002 MACTek Viator HART Modem and cables (USB connection)
★
(1) If a centering disc is required for a flanged probe, the centering disc can be ordered with options Sx or Px on page 122 in the model code. If a centering disc is required
for a threaded connection or as a spare part, it should be ordered using the item numbers listed below.
(2) To order a centering disc in a different material, consult the factory.
(3) 1½ in. NPT threaded connection is required.
(4) For pressure and temperature rating, see “Fisher® & Masoneilan® flange rating” on page 105.