Troubleshooting guide

128
Reference Manual
00809-0100-4308, Rev BA
Appendix A: Reference Data
December 2014
Reference Data
2A Flexible Twin Lead with weight Flange / 1½-in., 2-in. Thread Min.: 3 ft. 4 in. (1 m)
Max.: 55 ft. 9 in. (17 m)
3A Coaxial (for level measurement)
(2)
Flange / 1-in., 1½-in., 2-in.
Thread
Min.: 1 ft. 4 in. (0.4 m)
Max.: 19 ft. 8 in. (6 m)
Probe length units (see page 113 for total probe length)
E English (feet, inches)
M Metric (meters, centimeters)
Probe length (feet / meters)
XXX 0-55 feet or 0-17 meters
Probe length (inches / centimeters)
XX 0-11 inches or 0-99 Centimeters
Options
Certifications
P1 Hydrostatic Testing
Q8 Material Traceability Certification per EN 10204 3.1
Q66 Welding Procedure Qualification Record Documentation
Installation options
LS Long Stud for Flexible Single Lead Probes, 25 cm (10 in.) (for use in tall nozzles)
BR Mounting Bracket for 1½-in. NPT Process Connection (see page 135)
Weight and anchoring options for flexible single probes (see page 112 for dimensions)
W1 Small Weight (for narrow tank openings less than 2 in. (50 mm)) (Required for PTFE covered probes)
W3 Heavy Weight (for most applications)
W4 Chuck (to tie probe end to tank bottom)
W2 Short Weight (when measuring close to the probe end)
Weight assembly options for flexible single probes
WU Weight or chuck not mounted on the probe
Centering disc (see page 118 for dimensions and size recommendation)
(3)
S2 2-in. Centering disc
(4)
S3 3-in. Centering disc
(4)
S4 4-in. Centering disc
(4)
P2 2-in. Centering disc PTFE
P3 3-in. Centering disc PTFE
P4 4-in. Centering disc PTFE
S6 6-in. Centering disc
(4)
S8 8-in. Centering disc
(4)
P6 6-in. Centering disc PTFE
P8 8-in. Centering disc PTFE
Table A-12. 3308 Series Spare Parts List - Probe