User guide

20 Mentor MP Short Form Guide

www.leroy-somer.com Issue : c

Place finger-guard on a flat solid surface and hit relevant break-outs with hammer as

shown (1). Continue until all required break-outs are removed (2). Remove any flash /

sharp edges once the break-outs are removed.

3.3 Mounting method

The Mentor MP can only be surface mounted.

Figure 3-3 Overall size 1A dimensions

1. The two outer holes must be used for mounting the Mentor MP.

293mm (11.54in)

250mm (9.84in)

444mm

(17.48in)

222mm

(8.74in)

95mm

(3.74in)

222mm (8.74in)

170mm (6.69in)

6.5mm (0.26in)

250mm (9.84in)

40mm

(1.58in)

22mm

(0.87in)

380mm

(14.96in)

4 holes to

suit M6

MA1

MA2

With the SMARTCARD installed to the drive, the depth measurement increases by

7.6mm (0.30 in).

Fans are only installed to the MP75A4(R) and MP75A5(R)

NOTE