Technical data

20
CHILLER SELECTION FORM
Gathering and providing the information on this form will help determine the chiller and options needed
to provide satisfactory performance. Fill out the form and send to a local Liebert representative.
Manufacturer/Model # of equipment
Maximum load - BTU/hr
Minimum load - BTU/hr
Yes / No
Load step-change?
to
Flow rate range - GPM
Desired flow rate - GPM
to
Min/Max leaving water temperature - °F
Desired leaving water temperature - °F
Pressure drop through load - PSI
Maximum rate of change (temperature) - °F/minute
%
Fluid type, % concentration
Yes / No
Non-ferrous loop required?
Estimated system volume - Gallons
Design ambient - °F
Elevation - Feet above sea level
ADDITIONAL COMMENTS: