Technical data

10
Figure 5 General piping arrangement, 1.5 to 5 ton, air cooled
GENERAL PIPING ARRANGEMENT
PROCESS FLUID CHILLER 1 1/2 - 5 TON AIR COOLED MODELS
Optional Pressure Gauges
Hot Gas Bypass
Solenoid Valve
Expansion Valve
External Equalizers
Service Access Ports
Temperature Sensing Bulb
Compressor
Evaporator
Sight Glass
Liquid Line Solenoid Valve
Condenser Coil
High Pressure Switch
1/2" (12.7mm) NPT Pressure Relief Valve
Check Valve
Lee-Temp Receiver
Head Pressure Control
Filter Drier
Sight Glass
Reservoir
Fluid Relief Valve
Ball Valve
Circulating Pump
Optional Reservoir Heater
Low Fluid Temperature Control
Bypass Fixed Orifice
Ball Valve
Cold Water Supply
Warm Water Return
Optional Fluid Relief Valve
Optional Fluid Check Valve
Optional Isolation Ball Valves
Optional Low Flow Switch
Optional High Temperature Thermostat
Optional Circuit Setter
Warm Water Return
Cold Water Supply
Optional Fluid Pressure Gauges
SINGLE CIRCUIT SHOWN
FACTORY PIPING
FIELD PIPING
*Components are not supplied by Liebert but are recommended for proper circuit operation and maintenance.
SL-11601 PG 5
REV 1/01
Schrader Valve
Schrader Valve
Pressure Balancing Valve