Data Sheet

V150E Valve
D103429X012
Product Bulletin
51.3:V150E
February 2013
2
Specifications
Valve Sizes and End Connection Styles
DN
J 80x100, J 100x150, J 150x200, J 200x250,
J 250x300 and NPS J 3x4, J 4x6, J 6x8, J 8x10,
J 10x12 flanged valves that mate with PN 10/16 or
CL150 raised-face flanges (see table 1)
Maximum Inlet Pressures
(1)
CG8M (317 Stainless Steel) Valves: Consistent with
ASME CL150 pressure-temperature ratings per ASME
B16.34 or with PN pressure- temperature ratings
shown in table 1, but do not exceed the material
temperature capabilities shown below or the pressure
drop limitations shown in table 4
Maximum Shutoff Pressure/Temperature Ratings
(1)
HD (Heavy Duty) Metal Ball Seals and PEEK/PTFE
Bearings: See table 4
Shutoff Classification
(1)
HD (Heavy Duty) Metal Ball Seal (Bidirectional Flow):
0.01% of valve capacity; Class IV per ANSI/FCI 70-2
and IEC 60534-4; Maximum allowable pressure drop
in reverse flow i s 6.9 bar (100 psi)
Construction Materials
See table 3
Temperature Capabilities
(1)
HD Metal Seals: -46 to 288_C (-50 to 500_F)
PEEK/PTFE Bearings: -198 to 260_C (-325 to 500_F)
Packing Constructions
PTFE V-ring: —198 to 232_C(-325to450_F)
ENVIRO-SEALt Single PTFE V-ring: -46 to 232_C(-50
to 450_F)
Flow Characteristic
Modified equal percentage
Dimensions
See table 6 for dimensions
Standard Flow Direction
Forward (into the convex face of t he V-notch ball)
Flow Coefficients
See Fisher Catalog 12
Actuator Sizing
See Catalog 14, section D for torque sizing factors.
Use the inlet NPS of the V150E to determine
appropriate factors from the Vee-Ball tables
Noise Levels
See Catalog 12
Maximum Ball Rotation
90 degrees
Actuator Mounting
Standard valve construction is for right-hand
mounting, as viewed from upstream end of valve with
the shaft horizontal. Actuator can be mounted in any
of four quadrants. Left-hand actuator mounting is
available upon request
Valve/Actuator Action
With compact 2052 spring and diaphragm or 1061
piston rotary actuator, the valve is field-reversible
between PDTC or PDTO: push-down-to-close
(extending actuator rod closes valve) and
push-down-to-open (extending actuator rod opens
valve)
Approximate Weight
See table 2
Options
J Flushing connection, J ENVIRO-SEAL packing
system,
J JIS 10K flanges
1. The pressure/temperature limits in this bulletin and any applicable standard or code limitation for valve should not be exceeded.