Data Sheet

ManualsBrandsEmerson ManualsControl ValvesEmerson Fisher Vee-Ball V150E

www.Fisher.com

Fisherr V150E Expanded Outlet Vee-Ball™

Control Valve

The Fisher V150E Vee-Ball control valve (figure 3)

features a flanged expanded outlet design. The outlet

flangeisonestandardlinesizediameterlargerthan

the inlet. The expanded outlet geometry streamlines

the flow through the valve as the flow area increases

from inlet to outlet. This valve body design

accommodates requirements when expanded

downstream piping is specified.

This bulletin provides details for the V150E Vee-Ball

controlvalves(showninfigure3).TheV150Evalve

retains many of the favorable traits of the traditional

Vee-Ball valve design with the added feature of an

expanded outlet. The inherent characteristic and

shearing action between the V-notch ball and the ball

seal (figure 2) promotes smooth operation over a wide

range of flow conditions.

The Fisher V150E control valve assembly features

CG8M (S31700) valve body and ball, and R30006 seal

materialsasstandard.Thelowfriction,zerolost

motion drive train assembly features a clamped

splined shaft, compact spring and diaphragm actuator,

and non-contact digital valve controller. This

construction will provide reliable, high-performance

throttling operation.

Features

 Trim Versatility —- Trim components are

interchangeable with existing V150, V200, and

V300 Series B valves.

 Easy Installation —- Flanged valve body design

eliminates exposed line flange bolting, reduces

alignment and installation time, and promotes

secure valve installations and piping integrity.

 Long Service Life —- The heavy-duty, metal seal

construction provides long service life in

demanding applications. The constant wiping

action of the seal across the ball's sealing surface

provides excellent service on high consistency

fibrous slurry applications. Also, low-friction, rigid

Fisher V150E Expanded Outlet Vee-Ball Valve

with 2052 Actuator

and FIELDVUEt DVC6200 Digital Valve Controller

W9915

bearing designs are tested and proven in high-load

and high-cycle applications.

 Smooth Valve Operation —- Precision machined

parts, pressure-balanced seal, and low friction

bearing designs allow smooth, precise movement

of the ball.

 Excellent Flow Control —- Precise contouring of the

Vee-Ball provides a modified equal percentage flow

characteristic.

 Expanded Outlet —- Satisfies installation

requirements where expanded down stream piping

is specified.

 Face-to-Face —- Unique dimensions typical of

expanded outlet ball valve designs.

 Structural Integrity —- One-piece valve body

improves structural integrity of the pressure

boundary by eliminating leak paths that could be

caused by the gaskets in two-piece, bolted valve

designs.

V150E Valve

D103429X012

Product Bulletin

51.3:V150E

February 2013

Summary of content (8 pages)

PAGE 1
Product Bulletin V150E Valve 51.3:V150E February 2013 D103429X012 Fisherr V150E Expanded Outlet Vee-Ball™ Control Valve The Fisher V150E Vee-Ball control valve (figure 3) features a flanged expanded outlet design. The outlet flange is one standard line size diameter larger than the inlet. The expanded outlet geometry streamlines the flow through the valve as the flow area increases from inlet to outlet. This valve body design accommodates requirements when expanded downstream piping is specified.
PAGE 2
Product Bulletin V150E Valve 51.3:V150E February 2013 D103429X012 Specifications Valve Sizes and End Connection Styles DN J 80x100, J 100x150, J 150x200, J 200x250, J 250x300 and NPS J 3x4, J 4x6, J 6x8, J 8x10, J 10x12 flanged valves that mate with PN 10/16 or CL150 raised-face flanges (see table 1) Maximum Inlet Pressures(1) CG8M (317 Stainless Steel) Valves: Consistent with ASME CL150 pressure-temperature ratings per ASME B16.
PAGE 3
Product Bulletin V150E Valve 51.3:V150E February 2013 D103429X012 Table 1. Valve Body Material, End Connections, and Ratings VALVE DESIGN VALVE BODY MATERIAL V150E CG8M VALVE SIZE FLANGE END CONNECTIONS DN 80x100, 100x150, 150x200, 200x250, 250x300 Compatible with PN 10/16 raised-face flanges NPS 3x4, 4x6, 6x8, 8x10, 10x12 Compatible with CL150 raised-face flanges Table 2.
PAGE 4
Product Bulletin V150E Valve 51.3:V150E February 2013 D103429X012 Figure 1.
PAGE 5
Product Bulletin V150E Valve 51.3:V150E February 2013 D103429X012 Table 4. Fisher V150E Maximum Allowable Shutoff Pressure Drop (based on trim [bearing and seal] and ASME pressure temperature rating of the valve material [CG8M]) BEARING MATERIAL PEEK/PTFE BEARING MATERIAL PEEK/PTFE VALVE SIZE, DN BALL SEAL TEMPERATURE RANGE, _C 80x100 100x150 150x200 200x250 250x300 19 Bar HD Metal (R30006)(1) -46 to -29 19 19 19 19 -29 to 38 19 19 19 19 19 93 16.2 16.2 16.2 16.2 16.
PAGE 6
Product Bulletin V150E Valve 51.3:V150E February 2013 D103429X012 Figure 2. Fisher V150E Dimensions MATCHES CL150 RF, PN10 AND 16, OR JIS 10K FLANGES E B A U S DIA T W GE44656_A G K D Table 5. Fisher V150E Dimensions (see figure 2) APPROXIMATE WEIGHT mm DN(1) A B D G K S T U W E (optional) kg 80x100 165 82 214 111 130 19.1 152 31.8 14.2 12.7 26 100x150 163 76 214 127 141 19.1 152 31.8 14.2 12.7 28 150x200 207 101 214 154 164 25.4 152 31.8 17.5 12.
PAGE 7
V150E Valve D103429X012 Product Bulletin 51.3:V150E February 2013 Figure 3.
PAGE 8
Product Bulletin 51.3:V150E February 2013 V150E Valve D103429X012 Neither Emerson, Emerson Process Management, nor any of their affiliated entities assumes responsibility for the selection, use or maintenance of any product. Responsibility for proper selection, use, and maintenance of any product remains solely with the purchaser and end user. Fisher, Vee-Ball, ENVIRO-SEAL, and FIELDVUE are marks owned by one of the companies in the Emerson Process Management business unit of Emerson Electric Co.