Instruction Manual

Lever-Lock Handlever Actuator

Instruction Manual

May 2009

Table 1. Specifications

Lever-Lock Handlever Actuator Sizes

See table 2

Valve Compatibility

Mounts on A81 valves per table 2

Maximum torque Output

See table 3

Handlever Length

Maximum of 432 mm (17 inches). See figure 2

and table 4

Construction Materials

Handle, quadrant plate, lever, and mounting

bracket are all steel materials. Spring, set screws,

and fasteners are stainless steel

Dimension and Approximate Weights

See figure 2 and table 4

1. The pressure/temperature limits in this manual, and any applicable code or standard limitation, should not be exceeded.

Table 2. Fisher A81 Valve / Lever-Lock Handlever Compatibility

HANDLEVER

ACTUATOR SIZE

VALVE SIZE SHAFT SIZE SQUARE SIZE

DN NPS mm Inches mm

50 2 12.7 1/2 9

80 3 15.9 5/8 11

100 4 19.1 3/4 14

150 6 25.4 1 17

Table 3. Maximum Allowable Torques and Handlever Force Requirements

VALVE DISK

POSITION

MAXIMUM TORQUE

HANDLEVER FORCE REQUIRED

Size I Size II

NSm InSLb NSm InSLb

N Lbf

0 Degrees

(Breakout Torque)

119 1050 164 1450 423 95

All Other Angles

(Dynamic Torque)

47 420 70 620 178 40