Data Sheet

M Series Actuators
Product Bulletin
22.2:M
November 2007
3
Table 1. M Series Gear Actuator for A11 (CL600)
VALVE
SIZE,
NPS
VALVE
SHAFT
SIZE,
MAXIMUM
RECOMMENDED
TORQUE
(1)
ACTUATOR
SIZE
HANDWHEEL
DIAMETER,
INCHES
RIM FORCE
(2)
NUMBER
OF
TURNS
TO
MAXIMUM TORQUE
RATING OF
ACTUATOR
NPS
SIZE
,
INCHES
nSm lbSin
SIZE
INCHES
n lb
TO
CLOSE
(3)
NSm LbfSin
3 13/32 113 1,000
(4)
1KE 12 80 18 9.5 452 4,000
4 5/8 303 2,690
(4)
1KE 12 209 47 9.5 452 4,000
6
7/8
643 5,700 2KE
12
445 100 9.5 678 6,000
6 7/8
765 6,780
(4)
5KE
12
400 90 12.5 904 8,000
8 1
643
846
5,700
7,500
2KE
5KE
12
12
445
445
100
100
9.5
12.5
678
904
6,000
8,000
8
1
1349 11,960
(4)
7KE 18 436 98 13.5 2,260 20,000
10
1-3/8
1-1/2
1354
2144
12,000
19,000
7KE
9KE
18
24
440
440
99
99
13.5
16
2,260
3,390
20,000
30,000
10
1-1/2 3520 31,160
(4)
10KE–6 18 214 48 72 8,474 75,000
12
1-3/8
1-3/4
1354
2144
12,000
19,000
7KE
9KE
18
24
440
440
99
99
13.5
16
2,260
3,390
20,000
30,000
12
1-3/4 3520 31,160
(4)
10KE–6 18 214 48 72 8,474 75,000
1. Maximum recommended torque for the valve/actuator combination is based on valve shaft rating, actuator rating and rim force.
2. Rim force required to produce Maximum recommended torque.
3. This column shows the number of times the handwheel must be turned to close the valve 90 degrees.
4. Shaft rating of the A11 valve.
Ordering Information
Because the M Series actuators for the A11 and
A31A valves are often available in more than one
size for any given valve size, they should be chosen
according to torque requirements of the valve.
Please specify actuator size when specifying valve
size and class.
M Series actuators for the A41 valve have been
matched to the requirements of each valve size and
should be chosen according to the valve size
requested.