Data Sheet

Lever-Lock Handlever Actuator
D500042X012
Product Bulletin
22.2:001
January 2013
4
Ordering Information
When ordering, specify:
Application
1. Valve type number, size, and shaft diameter or shaft
size with which the lever-lock handlever actuator will
be used.
2. Valve disc rotation
Actuator
Refer to table 1 for maximum output torque and select
the proper size of lever-lock handlever. For service
conditions that require higher torque capabilities than
those listed in table 1, use a manual gear actuator.
Valve
Refer to separate valve bulletins for ordering
information.
Emerson Process Management
Marshalltown, Iowa 50158 USA
Sorocaba, 18087 Brazil
Chatham, Kent ME4 4QZ UK
Dubai, United Arab Emirates
Singapore 128461 Singapore
www.Fisher.com
The contents of this publication are presented for informational purposes only, and while every effort has been made to ensure their accuracy, they arenot
to be construed as warranties or guarantees, express or implied, regarding the products or services described herein or their use or applicability. All sales are
governed by our terms and conditions, which are available upon request. We reserve the right to modify or improve the designs or specifications of such
products at any time without notice.
E 1991, 2013 Fisher Controls International LLC. All rights reserved.
Fisher is a mark owned by one of the companies in the Emerson Process Management business unit of Emerson Electric Co. Emerson Process Management,
Emerson, and the Emerson logo are trademarks and service marks of Emerson Electric Co. All other marks are the property of their respective owners.
Neither Emerson, Emerson Process Management, nor any of their affiliated entities assumes responsibility for the selection, use or maintenance
of any product. Responsibility for proper selection, use, and maintenance of any product remains solely with the purchaser and end user.