Data Sheet

Lever-Lock Handlever Actuator
D500042X012
Product Bulletin
22.2:001
January 2013
2
Specifications
Lever-Lock handlever Actuator Sizes
See table 1
Valve Compatibility
J Accepts A41 valve Double-D shafts from 12.7 to
25.4 mm (1/2 to 1 inches)
J Accepts A11 valve square-end shafts from 10.3 to
15.9 mm (13/32 to 5/8 inches)
Maximum Torque Output
See table 1
Handlever Length
Maximum of 432 mm (17 inches). See figure 1 and
table 2
Construction Materials
Handle, quadrant plate, and handle grip are all ductile
iron
Dimensions and Approximate Weights
Seefigure1andtable2
Options
J Adjustable travel stops
J Limits Switches
Table 1. Handlever Actuator Sizes for Fisher A41 and A11 Valves Sizes, and Maximum Allowable Torque for
Handlever Actuators
HANDLEVER
ACTUATOR
SIZE
VALVE
SIZE,
NPS
A41 VALVES
(1)
A11 VALVES
(2)
CL150 CL300 CL600
Maximum Allowable Torque, NSm
I
3 58.2
(3)
124.3 90.4
4 124.3 --- ---
II
4 --- 163.9 163.9
6 163.9 163.9 ---
6 163.9 --- ---
HANDLEVER
ACTUATOR
SIZE
VALVE
SIZE,
NPS
Maximum Allowable Torque, LbfSin
I
3 515
(3)
1100 800
4 1100 --- ---
II
4 --- 1450 1450
6 1450 1450 ---
6 1450 --- ---
1. A41 torque values are based on S17400 (17-4PH stainless steel) H1075 stem material.
2. A11 torque values are based on S17400 (17-4PH stainless steel) H1025 stem material.
3. Do not exceed this torque regardless of actuator size.