Instruction Manual

Instruction Manual Supplement

D103277X012

L2, L2e, and L2sj Controller

April 2013

Installation

1. Install a suitable flange gasket.

2. Insert the displacer end of the sensor into the tank connection. Position the sensor so it can be bolted to the tank

flange.

3. Complete the sensor flange to tank flange connection.

Refer to figure 5 for NPS 2X2 flange dimensions and figure 6 for NPS 2X4 flange dimensions for the L2 controller,

figure 7 for NPS 2X2 flange dimensions and figure 8 for NPS 2X4 flange dimensions for the L2e controller, and figure 9

for NPS 2X4 flange dimensions for the L2sj controller.