Instruction Manual

Instruction Manual
D103198X012
i2P-100 Transducer
July 2014
23
Figure 13. Fisher i2P‐100 Transducer Assembly
NOTE:
APPLY LUBRICANT/SEALANT/ADHESIVE
30C2230‐C
Parts Kits
Description Part Number
Repair Kit for i2P‐100 electro‐pneumatic transducer
Contains O‐rings (key 4, 9, 12, and 55) and
Filter/Restrictor assembly (key 10 & 11) R2P100X0032
Parts List (see figure 13)
Note
Part numbers are shown for recommended spares only. Part numbers for
recommended spares that are included in the i2P‐100 Repair Kit are not
shown. The filter (key 11) is available as a stand‐a‐lone recommended
spare as well as in the Repair Kit.
For part numbers not shown, contact your Emerson Process
Management sales office.
Housing
Key Description Part Number
1 Housing, Aluminum
2 Cover (2 req'd)
3 Configuration Label
4* O‐Ring
(1)
(2 req'd)
6 Feed Thru (2 req'd)
7 Wire Retainer (2 req'd)
8 Set Screw (2 req'd)
9* O‐Ring
(1)
10 Restrictor, Primary
(1)
11* Filter
(1)
10C2246X012
12* O‐Ring
(1)
13 Filter Cap
14 Machine Screw (2 req'd)
15 Flame Arrestor
16 Flame Arrestor
17 Lubricant, silicone sealant (not furnished with transducer)
18 Thread locking adhesive, high strength (not furnished
with transducer)
55 O‐Ring
(1)
69 Nameplate, aluminum
70 Screw (2 req'd)
71 Vent Assembly
76 Pipe Plug
102 Washer
*Recommended spare parts
1. Available in the Repair Kit