Data Sheet

ManualsBrandsEmerson ManualsControl ValvesEmerson Fisher HP & EH

www.Fisher.com

Fisherr HP Series Control Valves

HP (Globe Valve)

HPA (Angle Valve)

 Balanced High-Temperature Trim

 Balanced Tight Shutoff Trim

 Unbalanced Trim

Fisher HP Series control valves are single-port,

high-pressure, globe- or angle-style valves with metal

seats, cage guides, and push-down-to-close valve plug

action.

These valves are designed for high -pressure

applications in process control industries such as

power generation, hydrocarbon production, chemical

processing, and refining.

HP Series valves have NACE compliant materials

available. Extra valve body wall thickness provides a

safety margin of protection against erosion, as well as

extra protection against corrosion due to chemical

attack. Because these valves feature a thicker valve

body wall, they are available in higher intermediate

ratings with weld-end fittings.

Unless otherwise noted, all NACE references are t o

NACE MR0175-2002 and MR0103.

Balanced

High-Temperature Trim

HPD and HPAD

These valves use a balanced valve plug with graphite

piston rings and are well suited for general applications

with process temperatures in excess of 232_C(450_F),

where extremely tight shutoff is not required.

X0183-1

FISHER HP VALVE WITH 667 ACTUATOR AND FIELDVUE™

DVC6200 DIGITAL VALVE CONTROLLER

Balanced Tight Shutoff

Trim

HPT and HPAT

These valves use a balanced valve plug and offer

excellent shutoff with process temperatures below

232_C(450_F). The temperature limits of HPT can be

extended above 232_C(450_F) to 316_C(600_F) by

using PEEK (PolyEtherEtherKetone) anti-extrusion rings

in combination with a spring-loaded PTFE seal. The

PEEK anti-extrusion rings expand to help close off the

clearance gaps on the plug outside diameter and the

cage inside diameter where the PTFE seal may extrude

at high temperatures and pressures.

HP Valve

D101635X012

Product Bulletin

51.2:HP

October 2014

Summary of content (28 pages)

PAGE 1
Product Bulletin HP Valve 51.2:HP October 2014 D101635X012 Fisherr HP Series Control Valves HP (Globe Valve) HPA (Angle Valve)  Balanced High-Temperature Trim  Balanced Tight Shutoff Trim  Unbalanced Trim Fisher HP Series control valves are single-port, high-pressure, globe- or angle-style valves with metal seats, cage guides, and push-down-to-close valve plug action.
PAGE 2
Product Bulletin HP Valve 51.2:HP October 2014 D101635X012 Specifications Available Configurations(1) and Valve Sizes See table 1 Common Characteristics: Designed according to: J ASME B16.34 Valve-Flanges, Threaded and Welding End and J ANSI/ISA-75.08.
PAGE 3
Product Bulletin HP Valve 51.2:HP October 2014 D101635X012 Specifications (continued) Bonnet Style and Mounting(1) J Standard Bonnet: See figure 1 Yoke Temperature Limit: Standard bonnet with cast iron yoke is limited to 537_C (1000_F) J Optional Style 1–Extension Bonnet: Used for NPS 1 and 2 valves for CL900 or 1500, and NPS 1 valves for CL2500 (see figures 14 and 15) Packing Arrangements J Single, J Double, and J Leakoff standard packing, or optional J ENVIRO-SEAL™ and J HIGH-SEAL packing systems.
PAGE 4
Product Bulletin HP Valve 51.2:HP October 2014 Figure 1. Fisher HPD Valve Assembly (NPS 2 to 6) D101635X012 Cavitrol III, Whisper Trim III, and WhisperFlo Cages To eliminate cavitation damage in a properly-sized valve, a Cavitrol III cage is available with HPS, HPAS, HPT, and HPAT control valves. FLOW W5815A-1 Figure 2.
PAGE 5
Product Bulletin HP Valve 51.2:HP October 2014 D101635X012  Standard Hard Trim Materials–The cage, valve plug, and other trim parts are manufactured from hardened materials. This standard feature provides excellent wear resistance.  Control of Low Flow Rates/Tight Shutoff–Micro-Flute and Micro-Form valve plugs (figures 6 and 7, respectively) provide superb rangeability in high-pressure, low-flow applications, while maintaining tight shutoff (table 4).
PAGE 6
Product Bulletin HP Valve 51.2:HP October 2014 D101635X012 Table 2. Typical Flow Coefficients(1) Valve Size, NPS Valve Style Characteristic Maximum Cv 1 HP CL1500 Modified Equal Percentage 17.1 2 HP CL1500 Linear 52.2 3 HP CL1500 Linear 121 4 HP CL1500 Linear 201 6 HP CL1500 Linear 425 1 HPA CL1500 Modified Equal Percentage 2 HPA CL1500 Linear 1 HPA CL2500 Modified Equal Percentage 14.3 2 HPA CL2500 Linear 47.4 Table 3.
PAGE 7
Product Bulletin HP Valve 51.2:HP October 2014 D101635X012 Material Selection Guidelines from tables 7 and 12. Refer to figure 12 to determine pressure drop limits of the valve body-trim combinations selected. Use the following steps as a guideline for the selection of materials: 1. Determine the pressure/temperature rating of the valve body size and material required. Inlet pressure and temperature must always be limited by the applicable ASME pressure/temperature rating. 2.
PAGE 8
Product Bulletin HP Valve 51.2:HP October 2014 D101635X012 Table 5. Port Diameters, Valve Plug Travel, Yoke Boss Diameters for TSO (Tight Shutoff) Trim VALVE TYPE TRIM MAX TRAVEL mm Inch YOKE BOSS SIZE mm Inch mm Inch CV REDUCTION AT 100% TRAVEL(1) PORT DIAMETER Nominal mm Actual TSO Inch UNBALANCE AREA Inch2 Balanced Plugs–Flow Down Only HPT NPS 3(2) CAV III 3-Stage 63.5 2.5 90 3-9/16 47.6 1.875 42.9 1.6875 5% 0.031 HPT NPS 4 CAV III 3-Stage 76.2 3 90 127 3-9/16 5 73.
PAGE 9
Product Bulletin HP Valve 51.2:HP October 2014 D101635X012 Figure 4.
PAGE 10
Product Bulletin HP Valve 51.2:HP October 2014 D101635X012 Table 6.
PAGE 11
Product Bulletin HP Valve 51.2:HP October 2014 D101635X012 Table 7.
PAGE 12
Product Bulletin HP Valve 51.2:HP October 2014 D101635X012 Table 8. Additional Globe Valve Specifications VALVE SIZE, NPS VALVE BODY DESIGN AND PLUG STYLE FLOW CHARACTERISTIC PORT DIAMETER mm Inches VALVE PLUG TRAVEL mm Inches VALVE STEM DIAMETER mm Inches HPS w/Micro-Flute 6.4 12.7 0.25 0.5 19 19 0.75 0.75 12.7 12.7 1/2 1/2 HPS w/Micro-Form 6.4 12.7 19.1 0.25 0.5 0.75 19 19 19 0.75 0.75 0.75 12.7 12.7 12.7, 19.1 1/2 1/2 1/2, 3/4 Modified equal percentage HPS w/Micro-Form 19.1 25.
PAGE 13
Product Bulletin HP Valve 51.2:HP October 2014 D101635X012 Table 8. Additional Globe Valve Specifications (Continued) VALVE SIZE, NPS VALVE BODY DESIGN AND PLUG STYLE FLOW CHARACTERISTIC PORT DIAMETER mm Inches VALVE PLUG TRAVEL mm Inches VALVE STEM DIAMETER mm Inches Modified equal percentage Linear (cage style: (Std) 4 HPD, HPT 92.1 3.625 51 2 19.1, 25.4 3/4, 1 Linear (cage style: Whisper Trim III level D3) HPD, HPT 73 2.875 51 2 19.1, 25.
PAGE 14
Product Bulletin HP Valve 51.2:HP October 2014 D101635X012 Table 9. Valve Stem Travels for CL2500 Globe Valves VALVE SIZE, NPS 1 VALVE DESIGN / PLUG STYLE PORT DIAMETER CHARACTERISTIC mm Inches mm Inches Equal Percentage 6.4, 9.5, 12.7, 19.1, 25.4 0.25, 0.375, 0.5, 0.75, 1 19.1 0.75 Modified Equal Percentage 6.4, 9.5, 12.7, 19.1, 25.4 0.25, 0.375, 0.5, 0.75, 1 25.4 1 Equal Percentage 6.4, 19.1, 25.4, 31.8 0.25, 0.75, 1, 1.25 19.1 0.75 Modified Equal Percentage 6.4, 19.1, 25.
PAGE 15
Product Bulletin HP Valve 51.2:HP October 2014 D101635X012 Table 11. Additional Angle Valve Specifications VALVE SIZE, NPS VALVE BODY DESIGN AND PLUG STYLE FLOW CHARACTERISTIC Equal percentage Modified equal percentage VALVE PLUG TRAVEL mm Inches VALVE STEM DIAMETER mm Inches 0.25 0.375 0.5 19 19 19 0.75 0.75 0.75 12.7 12.7 12.7 1/2 1/2 1/2 HPAS w/Micro-Flute Up(2) HPAS w/Micro-Form Up 6.4 12.7 19.1 0.25 0.5 0.75 19 19 19 0.75 0.75 0.75 12.7 12.7 12.7, 19.
PAGE 16
Product Bulletin HP Valve 51.2:HP October 2014 D101635X012 Table 11. Additional Angle Valve Specifications (continued) VALVE SIZE, NPS VALVE BODY DESIGN AND PLUG STYLE FLOW CHARACTERISTIC Equal percentage Modified equal percentage Linear (cage style: Std) 3 4 HPAT, HPAD Linear (cage style: Whisper III, level A1) VALVE STEM DIAMETER mm Inches Down 47.6 1.875 29 1.125 12.7, 19.1 1/2, 3/4 Down 47.6 1.875 38 1.5 12.7, 19.1 1/2, 3/4 47.6 1.875 38 1.5 12.7, 19.
PAGE 17
Product Bulletin HP Valve 51.2:HP October 2014 D101635X012 Figure 6. Fisher HPS Trim with Micro-Flute Valve Plug Figure 7. Fisher HPS Trim with Micro-Form Valve Plug W5816-1 W5817-1 FLOW FLOW  Trim 203– Trim 203 is the standard trim for stainless steel valve body materials and should only be used with stainless steel valve body materials.
PAGE 18
Product Bulletin HP Valve 51.2:HP October 2014 Figure 8. NPS 2 Fisher HPS Trim with Cavitrol III 3-Stage Cage D101635X012 Figure 10. Fisher HPD Trim with Whisper Trim III Level D Cage (also available in HPT and HPS) W5818-1 W5951-1 FLOW Figure 9. Fisher HPT Trim with Whisper Trim III Level A1 Cage (also available in HPD [NPS 2-6] and HPS [NPS 2 and 3]) FLOW Figure 11.
PAGE 19
Product Bulletin HP Valve 51.2:HP October 2014 D101635X012 Table 12.
PAGE 20
Product Bulletin HP Valve 51.2:HP October 2014 D101635X012 Table 12.
PAGE 21
Product Bulletin HP Valve 51.2:HP October 2014 D101635X012 Table 12.
PAGE 22
Product Bulletin HP Valve 51.2:HP October 2014 D101635X012 Table 13. Flowing Pressure Drop Limits for NPS 6 HPD and HPT Valves (Without Cavitrol III or Whisper Trim III Cage) MAXIMUM FLOWING PRESSURE DROP STEM DIAMETER, mm (INCHES) FLOW MEDIA All except boiler feedwater Boiler feedwater Bar PSI Flow Down Flow Up Flow Down Flow Up 19 (3/4) 103 --- 1500 --- 25.4 (1) 172 --- 2500 --- 31.8 (1-1/4) 259 --- 3750 --- 51.8 x 31.8(1) (2 x 1-1/4) 259 259 3750 3750 31.
PAGE 23
Product Bulletin HP Valve 51.2:HP October 2014 D101635X012 Table 14. Globe Valve Dimensions with Standard Bonnet VALVE SIZE, NPS Table 15.
PAGE 24
Product Bulletin HP Valve 51.2:HP October 2014 D101635X012 Table 16. Globe Valve Dimensions with Standard Bonnet Table 17.
PAGE 25
Product Bulletin HP Valve 51.2:HP October 2014 D101635X012 Figure 13. Globe Valve Dimensions with Standard Bonnet (also see tables 14, 15, and 16) MATCH LINE FOR ACTUATOR MATCH LINE FOR 585C SERIES ACTUATORS AND TYPE 657, 667 SIZE 100 ACTUATORS MATCH LINE FOR ACTUATOR MATCH LINE FOR ALL OTHER ACTUATORS 25.4 (1.
PAGE 26
Product Bulletin HP Valve 51.2:HP October 2014 D101635X012 Table 18. Dimensions D for Style 1 Extension Bonnet (A, B, and G Dimensions Listed in Figure 13 Do Not Change When Extension Bonnet is Used) D VALVE SIZE, NPS Yoke Boss Diameters, mm (Inches) 71 (2-13/16) 90 (3-9/16) 127 (5) mm 1 (std trim) 383 390 --- 2 (std, Whisper III, Cavitrol III, 3-stage trim) 430 445 504 2 (Cavitrol III 2-stage trim) 447 463 517 1 (std trim) 15.09 15.
PAGE 27
Product Bulletin HP Valve 51.2:HP October 2014 D101635X012 Table 19.
PAGE 28
Product Bulletin HP Valve 51.2:HP October 2014 D101635X012 Table 20.