Data Sheet

EH and EHA Valves
D100042X012
Product Bulletin
51.2:EH
April 2015
29
Table 20. Approximate Weights (Valve and Bonnet Assemblies) (NPS 1-1/2 x 1 through 6 Globe and
NPS 1 through 6 Angle Valves)
VALVE SIZE, NPS
GLOBE VALVES ANGLE VALVES
CL2500 CL2500
Kilograms Pounds Kilograms Pounds
Flg
SWE and
BWE
Flg
SWE and
BWE
Flg
SWE and
BWE
Flg
SWE and
BWE
1 --- --- --- --- 73.1 53.5 161 118
1-1/2 x 1 --- 46 --- 101 --- --- --- ---
2 --- --- --- --- 98 66.2 216 146
2 x 1 78 47 173 104 --- --- --- ---
3 x 2 161 94 355 207 --- --- --- ---
3 223 163 492 359 181 99.3 399 219
4 x 3 265 162 585 357 --- --- --- ---
4 338 243 745 536 --- 203.2 --- 448
6 x 4 526 257 1160 567 --- --- --- ---
6 785 544 1731 1199 --- 496.2 --- 1094
8 x 6 955 558 2106 1231 --- --- --- ---
8 --- --- --- --- --- --- --- ---
Table 21. Approximate Weights (Valve Assembly and Bonnet) (NPS 8 through 14 Valves)
VALVE
SIZE,
NPS
WEIGHTS
CL1500 CL2500
BWE FLG BWE FLG
Kilograms Pounds Kilograms Pounds Kilograms Pounds Kilograms Pounds
8 1400 3100 1700 3700 1900 4100 2200 4700
10 1500 3300 1900 4100 2000 4400 - - - - - -
12 3400 7300 3900 8600 3400 7600 - - - - - -
14 3400 7300 - - - - - - 3400 7600 - - - - - -
Installation
The valve must be installed so flow through the valve
matches the flow direction arrow on the valve body.
Consideration should be given to installing an
upstream strainer, especially if the valve uses a
multi-orifice Whisper Trim III or Cavitrol III cage.
For NPS 8 and larger valves, the recommended
installation position is with the valve in a horizontal
pipeline and the actuator vertical above the valve.
Other orientations may result in shortened trim life
and difficulty with field maintenance.
Overall dimensions are shown in figures 23, 24, 25, 26,
and 27. Face-to-face dimensions are in compliance
with ANSI/ISA-S75 for valves smaller than NPS 8. For
NPS 8 and larger valves, face-to-face dimensions are
longer than industry standards for valves of this size
and rating. Actual end connection dimensions
conform to ASME B16.25 for buttwelding ends and to
ASME B16.5 for flanged ends.