Data Sheet
www.Fisher.com
Fisherr FIELDVUE™ DVC6200 Digital Valve
Controller / Magnet Assembly Dimensions
Digital Valve Controller Configuration
(1)
Mounting Figure Page
DVC6200
DVC6200 SIS
DVC6200f
DVC6200p
Integral mounting to the Fisher GX control
valve and actuator system
With integrally mounted filter regulator 1 1, 2
Integral mounting to Fisher rotary actuators
Sliding-stem linear applications
Quarter-turn rotary applications
DVC6205
DVC6205 SIS
DVC6205f
DVC6205p
Remote mount base unit ‐ ‐ ‐ 2 3
DVC6215 Feedback unit ‐ ‐ ‐ 3 4
1. DVC6200 digital valve controllers can also be mounted on other actuators that comply with IEC 60534-6-1, IEC 60534-6-2, VDI/VDE 3845 and NAMUR mounting
standards.
Magnet Assembly
(1)
Figure Page
SStem #19 19 mm / 3/4 inch 4 4
SStem #25 25 mm / 1 inch 5 4
SStem #38 38 mm / 1-1/2 inch 6 5
SStem #50 50 mm / 2 inch 7 5
SStem #100 100 mm 4 inch 8 6
SStem #210 210 mm / 8-1/4 inch 9 6
RShaft #1 / LRC
(2)
Fisher 2052 Size 1 & 3, 1051/1052 Size 40-70, 1061 Size 30-100, Sliding Stem > 210 mm (8.25 inches) 10 7
RShaft #2 / LRC
(2)
2052 Size 1, 1051/1052 Size 20-33 10 7
RShaft End 90 degree 11 8
1. Linear magnet assembly width dimensions are shown in figure 6.
2. Linear Roller Cam.
Figure 1. FIELDVUE DVC6200, DVC6200 SIS, DVC6200f, and DVC6200p Digital Valve Controller with Integrally
Mounted Filter Regulator
1/4-18 NPT
OUTPUT CONN A
FISHER 67CFR
1/4-18 NPT
SUPPLY CONN
1/4-18 NPT
OUTPUT CONN B
3/8-18 NPT
VENT CONN
203.4
(8.00)
54.9
(2.16)
59.4
(2.34)
1/2-14 NPT
CONDUIT CONN
BOTH SIDES
61.1
(2.4)
298.4
(11.75)
148.1
(5.83)
mm
(INCH)
DVC6200 Digital Valve Controller
D103543X012
Product Bulletin
62.1:DVC6200(S1)
October 2014