Instruction Manual

Instruction Manual
D103412X012
Detailed Setup—Transducer Block
January 2015
53
Travel Open
 Travel Open Alert—This alert is active if the Travel is greater than the Travel Open Alert Point.
 Travel Open Alert Enable—When enabled Travel Open Alert Enable activates the Travel Open Alert.
 Travel Open Alert Point—Travel Open Alert Point (TVL_OPEN_ALRT_PT [77.8]) is the value of the travel in percent
(%) or ranged travel, which, when exceeded, sets the Travel Open Alert.
 Travel Open Deadband—Travel Open Deadband (TVL_OPEN_DB [77.9]) is the travel in percent (%) of ranged travel
required to clear a Travel Open alert, once it has been set.
Travel Closed
This alert is active if the Travel is lower than the Travel Closed Alert Point.
 Travel Closed Alert—This alert is active is the Travel goes below the Travel Closed Alert Point.
 Travel Closed Alert Enable—When enabled Travel Closed Alert Enable activates the Travel Closed Alert.
 Travel Closed Alert Point—The Travel Closed Alert is set when the value of the travel, in percent (%) of ranged travel,
goes below the Travel Closed Alert Point (TVL_CLOSED_ALRT_PT [77.10]).
 Travel Closed Deadband—Travel Closed Deadband (TVL_CLOSED_DB [77.11]) is the travel in percent (%) of ranged
travel required to clear a Travel Closed alert, once it has been set.
Proximity
 Proximity Hi Hi Alert—This alert is active if the Travel is within the detection band set by the Travel Hi Hi Alert Point
and the Travel Hi Hi Deadband.
 Proximity Hi Hi Alert Enable—When enabled Proximity Hi Hi Alert Enable activates the Proximity Hi Hi Alert.
 Proximity Hi Alert—This alert is active if the Travel is within the detection band set by the Travel Hi Alert Point and
the Travel Hi Deadband.
 Proximity Hi Alert Enable—When enabled Proximity Hi Alert Enable activates the Proximity Hi Alert.
 Proximity Lo Alert—This alert is active if the Travel is within the detection band set by the Travel Lo Alert Point and
the Travel Lo Deadband.
 Proximity Lo Alert Enable—When enabled Proximity Lo Alert Enable activates the Proximity Lo Alert.
 Proximity Lo Lo Alert—This alert is active if the Travel is within the detection band set by the Travel Lo Lo Alert Point
and the Travel Lo Lo Deadband.
 Proximity Lo Lo Alert Enable—When enabled Proximity Lo Lo Alert Enable activates the Proximity Lo Lo Alert.