Instruction Manual

Instruction Manual
D103557X012
Field Communicator Menu Trees
January 2015
93
Figure B-8. Alert Setup (2-3)
Electronics
1 Drive Signal Alert Enable
2-3-1
Alert Setup
1 Electronics
2 Supply Pressure Alert
3 Travel
4 Travel History
5 SIS / Partial Stroke
6 Output Circuit Comm Failure Enable
7 Shutdown On Alert
8 Alert Record/Instrument Time
Sensors
1 Travel Sensor Failure Shutdown
2 Temp Sensor Failure Shutdown
3 Minor Loop Sensor Failure Shutdown
4 Pressure Sensor Failure Shutdown
Travel
1 Travel Alert DB
2 Travel Deviation
3 Travel Limit
4 Travel Cutoff
5 Integrator
Travel Deviation
1 Travel Deviation
2 Travel Deviation Alert Enable
3 Travel Deviation Alert Point
4 Travel Deviation Time
Travel Limit
1 Travel Alert Hi Hi Enable
2 Travel Alert Hi Hi Point
3 Travel Alert Lo Lo Enable
4 Travel Alert Lo Lo Point
5 Travel Alert Hi Enable
6 Travel Alert Hi Point
7 Travel Alert Lo Enable
8 Travel Alert Lo Point
Travel Cutoff
1 Travel Cutoff Hi Enable
2 Hi Cutoff Point
3 Travel Cutoff Lo Enable
4 Lo Cutoff Point
Integrator
1 Integrator Sat Hi Enable
2 Integrator Sat Lo Enable
Travel History
1 Cycle Count/Travel Accum Deadband
2 Cycle Count Alert Enable
3 Edit Cycle Counts
4 Cycle Count Alert Point
5 Travel Accumulator Alert Enable
6 Edit Travel Accumulator
7 Travel Accumulator Alert Point
Alert Record/Instrument Time
1 Alert Record Not Empty Enable
2 Alert Record Full Enable
3 View Alert Records
4 Clear Records
5 Instrument Alert Record
6 Instrument Time is Approximate Enable
7 Edit Instrument Time
1
2-3-4
Supply Pressure Lo Alert
1 Supply Pressure Lo Alert Enable
2 Supply Pressure Lo Alert Point
NOTES:
1 OUTPUT CIRCUIT COMM FAILURE ENABLE IS AVAILABLE WHEN THE TRANSMITTER FUNCTION IS CONFIGURED.
2-3-2
2-3-3
2-3-3-2
2-3-3-3
2-3-3-5
2-3-3-4
SIS / Partial Stroke
1 EPPC Deviation
2 Tripped by the LCP Enable
3 SIS Locked in Safety Alert Enable
4 LCP Communication Failure Enable
2-3-5
Electronics
1 Drive Current Failure Shutdown
2 Critical NVM Failure Shutdown
3 Non-Critical NVM Failure Shutdown
4 Flash Integrity Failure Shutdown
5 Reference Voltage Failure Shutdown
6 Program Flow Failure Shutdown
7 SIS Hardware Failure Shutdown
8 Loop Current Validation Shutdown
2-3-8
Shutdown On Alert
1 Sensors
2 Electronics
2-3-7
2-3-7-1
2-3-7-2
2
2
2
2
2
2
2 FAST KEY SEQUENCES FOR THESE MENUS DROP ONE MENU SEQUENCE WHEN THE TRANSMITTER FUNCTION IS NOT CONFIGURED.