Instruction Manual

Instruction Manual

D103557X012

Configuration

January 2015

Select Clockwise/Toward Bottom, or Counterclockwise/Toward Top. Travel Sensor Motion establishes the proper

travel sensor rotation. For quarter‐turn actuators determine rotation by viewing the rotation of the magnet assembly

from the back of the instrument.

Note

Travel Sensor Motion in this instance refers to the motion of the magnet assembly. Note that the magnet assembly may be

referred to as a magnetic array in user interface tools.

D For instruments with Relay A and C: If increasing air pressure at output A causes the magnet assembly to move

down or the rotary shaft to turn clockwise, enter CW/To Bottom Inst. If it causes the magnet assembly to move up,

or the rotary shaft to turn counterclockwise, enter CCW/To Top Inst.

D For instruments with Relay B: If decreasing air pressure at output B causes the magnet assembly to down, or the

rotary shaft to turn clockwise, enter CW/To Bottom Inst. If it causes the magnet assembly to move up, or the rotary

shaft to turn counterclockwise, enter CCW/To Top Inst.

Maximum Supply Pressure

Enter the maximum supply pressure that is required to fully stroke the valve.