Instruction Manual

DVC6000 SIS
September 2013
8-6
Key Description Part Number
DVC6020 SIS and DVC6025 (see figure 8-2 and 8-7)
74 Mounting Bracket
82 Bias Spring, SST
(3)
83 Bearing Flange, PTFE-based (2 req’d)
(3)
84 Feedback Arm Assy, SST
(3)
85 E-ring, pl stl (2 req’d)
(3)
86 Plain Washer, pl stl (2 req’d)
(3)
87 Follower Post, SST
(3)
88 Roller, SST/PTFE
(3)
89 Spring Lock Washer, pl stl
(3)
90 Hex Nut, pl stl
(3)
91 Arm Assy, SST
92 Cap Screw, hex socket (4 req’d)
(3)
93 Torsion Spring, Feedback Arm
(3)
DVC6015, DVC6025, and DVC6035
(see figures 8-6, 8-7, and 8-8)
23 Cap Screw, hex socket (2 req’d)
(19,21)
44 Wire Retainer, pl stl (9 req’d)
(19,21)
49 Screw, self tapping (2 req’d)
Key Description Part Number
58 Set Screw, hex socket
(19)
62 Pipe Plug, hex hd, SST
(19)
131 Retainer Wire
251 Feedback housing
(19)
252 Assembly Plate Shield (DVC6015 only)
(19)
253 Terminal bracket
(19,21)
254 Terminal Strip
(19,21)
255 Terminal Cap
(19)
256 O-ring, fluorosilicone
(19)
257 Machine Screw, pan head (2 req’d) (DVC6015 only)
(19)
258 Label, cover
(19)
260 Hex Nut, SST (2 req’d)
261 Nameplate
265 Plug (DVC6015 and DVC6035 only)
(19)
Line Conditioner
LC340 Line conditioner 39B5416X012
8
*Recommended spare parts
3. Available in the DVC6010 SIS to DVC6020 SIS Conversion Kit
19. Available in Feedback Unit Kit
21. Available in Feedback Unit Termination Strip Kit