Instruction Manual

Parts
September 2013
8-5
Key Description Part Number
Terminal Box
DVC6010 SIS, DVC6020 SIS, DVC6030 SIS,
DVC6005 SIS (see figures 8-1, 8-2, 8-3, and 8-4)
4 Terminal Box Cap
34* O-ring
(1,9,26)
36* O-ring
(1,9,26)
44 Wire Retainer, pl stl (6 req’d) (not shown)
(2)
58 Set Screw, hex socket, SST
(2)
72 Cap Screw, hex socket, SST
(2)
164 Terminal Box Assembly
(9)
246 SIS Label
247 TÜV or exida Approval Label
Remote Terminal Box
DVC6005 SIS (see figure 8-4)
4 Terminal Box Cap
(18)
34* O-ring
(1,9,18)
36* O-ring
(1,9,18)
44 Wire Retainer, pl stl (5 req’d) (not shown)
(2,19)
58 Set Screw, hex socket, SST
(2,18)
62 Pipe Plug, hex hd, SST
(18)
72 Cap Screw, hex socket, SST (3 req’d)
(2,18)
262 Adapter
(18)
263* O-ring
(18)
Standard 1F463606992
Extreme temperature option, (fluorosilicone) 1F4636X0092
264 Terminal Box Assembly, remote
(18)
PWB Assembly
DVC6010 SIS, DVC6020 SIS, DVC6030 SIS,
DVC6005 SIS (see figures 8-1, 8-2, 8-3, and 8-4)
Note
Contact your Emerson Process Management sales
office for PWB Assembly FS numbers.
50* PWB Assembly
Pressure Gauges, Pipe Plugs, or Tire
Valve Assemblies (see figure 8-5)
47* Pressure Gauge, nickel-plated brass case, brass connection
Double-acting (3 req’d); Single-acting (2 req’d)
PSI/MPA Gauge Scale
To 60 PSI, 0.4 MPa 18B7713X042
To 160 PSI, 1.1 MPa 18B7713X022
PSI/bar Gauge Scale
To 60 PSI, 4 bar 18B7713X032
To 160 PSI, 11 bar 18B7713X012
66 Pipe Plug, hex hd
For double-acting and single acting direct w/gauges
(none req’d)
For single-acting reverse w/gauges (1 req’d)
For all units w/o gauges (3 req’d)
67 Tire Valve Assembly (3 req’d)
Key Description Part Number
Feedback / Remote Travel Sensor Parts
Common Feedback Parts
DVC6010 SIS, DVC6020 SIS, DVC6030 SIS,
DVC6015, DVC6025, and DVC6035
(see figures 8-1, 8-2, 8-3, 8-6, 8-7, and 8-8)
46 Alignment Pin
(6)
for DVC6010 SIS, DVC6030 SIS, DVC6015, and DVC6035
64 Anti-seize compound (not furnished with the instrument)
65 Lubricant, silicone sealant (not furnished with the instrument)
72 Cap Screw, hex socket (2 req’d)
(2)
for DVC6010 SIS, DVC6030 SIS, DVC6015, and DVC6035
78 Bias Spring, SST
(2)
for DVC6010 SIS, DVC6030 SIS, DVC6015, and DVC6035
79 Feedback Arm
for DVC6010 SIS, DVC6030 SIS, DVC6015, and DVC6035
80 Cap Screw, hex socket, SST
(2)
81 Square Nut, SST
(2)
104 Cap Screw, hex hd (4 req’d)
Aluminum Construction
DVC6010 SIS and DVC6015
Not for mounting on 1250 and 1250R actuators.
Mounting parts for 1250 and 1250R actuators are
included in the mounting kit for these actuators.
Stainless Steel Construction
DVC6010 SIS (oversized) (4 req’d)
Not for mounting on 1250 and 1250R actuators.
107 Mounting Bracket
(4)
DVC6010 SIS and DVC6015 only
Not for mounting on 1250 and 1250R actuators.
Mounting parts for 1250 and 1250R actuators are
included in the mounting kit for these actuators.
- - - Feedback Linkage Shield, see figures 2-1 and 2-2
Up to 50.4 mm (2-inch) travel
All sliding-stem actuators except 585C size 60
50.4 mm (2-inch) to 104mm (4-inch) travel
All sliding-stem actuators except 585C size 60
585C size 60, 19 mm (0.75 inch) to 104mm (4-inch) travel
163 Plain Washer, SST
(2)
223* Potentiometer/Bushing Assy
(20,26)
Standard Elastomers
DVC6010 SIS, DVC6020 SIS GE31447X012
DVC6030 SIS GE31448X012
Extreme Temperature option
(fluorosilicone elastomers)
DVC6010 SIS and DVC6020 SIS GE31450X012
DVC6030 SIS GE31451X012
DVC6015 and DVC6025
(19)
GE31453X012
DVC6035
(19)
GE31454X012
8
*Recommended spare parts
1. Available in the Elastomer Spare Parts Kit
2. Available in the Small Hardware Spare Parts Kit
4. Available in the DVC6020 SIS to DVC6010 SIS Conversion Kit
6. Available in the Alignment Pin Kit
9. Available in the Terminal Box Kit
18. Available in the Remote Terminal Box Kit
19. Available in Feedback Unit Kit
20. Available in the Remote Mount Retrofit Kit
26. Available in the SIS Preventative Maintenance Kit