Instruction Manual

DVC6000 SIS
September 2013
8-4
Parts List
Parts which do not show part numbers are not
orderable as individual parts. In most cases, they are
available in one of the parts kits listed under Parts
Kits.
Note
Parts with footnote numbers shown
are available in parts kits. Also see
footnote information at the bottom of
the page.
Key Description Part Number
Housing
DVC6010 SIS, DVC6020 SIS, DVC6030 SIS,
DVC6005 SIS (see figures 8-1, 8-2, 8-3, and 8-4)
1 Housing
(14)
11 Drive Screw (2 req’d)
(14)
20 Shield
(14)
52 Vent, plastic DVC6010 SIS and DVC6030 SIS only
(2)
74 Mounting Bracket
DVC6020 SIS Std
(3)
or pipe-away
(7)
75* O-Ring, DVC6020 SIS only
(7)
245 Pipe Plug, pl stl
(7)
, DVC6020 SIS Vent-away only
248 Screw, hex head (4 req’d), (DVC6005 SIS only)
(22)
249 Screw, hex head (4 req’d), (DVC6005 SIS only)
(22)
250 Spacer (4 req’d), (DVC6005 SIS only)
(22)
267 Standoff (2 req’d), (DVC6005 SIS only)
(22)
271 Screen
(14)
Common Parts
DVC6010 SIS, DVC6020 SIS, DVC6030 SIS,
DVC6005 SIS (see figures 8-1, 8-2, 8-3, and 8-4)
16* O-ring (3 req’d)
(1,26)
23 Cap Screw, hex socket, SST (4 req’d)
(2,16)
29 Warning label, for use only with LCIE hazardous area
classifications
33 Mach Screw, pan hd, SST (3 req’d)
(2)
38 Cap Screw, hex socket, SST (3 req’d)
(2,13)
43* Cover Assembly (includes cover screws)
Standard 38B9580X022
Extreme temperature option (fluorosilicone elastomers)
Aluminum Construction 38B9580X032
Stainless Steel Construction 38B9580X042
48 Nameplate
49 Screw, self tapping (2 req’d)
(13)
63 Lithium grease (not furnished with the instrument)
64 Anti-seize compound (not furnished with the instrument)
65 Lubricant, silicone sealant (not furnished with the instrument)
154 Retaining Ring (3 req’d)
(2)
237 Module Base Seal
(1,26)
Key Description Part Number
Module Base
DVC6010 SIS, DVC6020 SIS, DVC6030 SIS,
DVC6005 SIS (see figures 8-1, 8-2, 8-3, 8-4 and 8-5)
2 Module Base
(13)
11 Drive Screw (2 req’d)
(13)
12 O-ring
(1,26)
19 Label, Shield Assembly
(13)
61 Pipe Plug, hex socket (3 req’d)
(13)
236 Screen, for single-acting direct units only
(13)
243 Flame Arrestor Assy (3 req’d)
(13)
I/P Converter Assembly
DVC6010 SIS, DVC6020 SIS, DVC6030 SIS,
DVC6005 SIS (see figures 8-1, 8-2, 8-3, and 8-4)
39* O-ring
(1,8,10,26)
41 I/P Converter
(10,26)
169 Shroud
(10,16,26)
210* Boot, nitrile (2 req’d)
(1,10,26)
(see figure 7-3)
231* Seal Screen
(1,8,10,26)
Relay
DVC6010 SIS, DVC6020 SIS, DVC6030 SIS,
DVC6005 SIS (see figures 8-1, 8-2, 8-3, and 8-4)
24* Relay Assembly, (includes shroud, relay seal, mounting
screws)
(26)
Note
Relay B and C are not TÜV approved.
Low Bleed, nitrile
Relay A, double-acting 38B5786X072
Relay B, single-acting reverse 38B5786X112
Relay C, single-acting direct 38B5786X152
Extreme Temperature option (fluorosilicone elastomers)
Low Bleed
Relay A, double-acting 38B5786X082
Relay B, single-acting reverse 38B5786X122
Relay C, single-acting direct 38B5786X162
8
*Recommended spare parts
1. Available in the Elastomer Spare Parts Kit
2. Available in the Small Hardware Spare Parts Kit
3. Available in the DVC6010 SIS to DVC6020 SIS Conversion Kit
7. Available in the Pipe-Away Bracket Kit
8. Available in the Seal Screen Kit
10. Available in the I/P Converter Kit
13. Available in the Spare Module Base Assembly Kit
14. Available in the Spare Housing Assembly Kit
16. Available in the Spare Shroud Kit
22. Available in the Pipestand/Wall Mounting Kit
26. Available in the SIS Preventative Maintenance Kit