Instruction Manual

Introduction and Specifications

September 2013

1-3

testing methods, which reduce testing and

maintenance time, improve system performance, and

provide diagnostic capabilities.

Using a personal computer and ValveLink software,

AMS Suite: Intelligent Device Manager, or a Field

Communicator, you can perform several operations

with the DVC6000 SIS digital valve controller. You can

obtain general information concerning software

revision level, messages, tag, descriptor, and date.

Diagnostic information is available to aid you when

troubleshooting. Input and output configuration

parameters can be set, and the digital valve controller

can be calibrated. Refer to table 1-1 for details on the

capabilities of the DVC6000 SIS.

Using the HART protocol, information from the field

can be integrated into control systems or be received

on a single loop basis.

Specifications

WARNING

Refer to table 1-2 for application

specifications. Incorrect configuration

of a positioning instrument could

result in the malfunction of the

product, property damage or personal

injury.

Specifications for DVC6000 SIS digital valve

controllers are shown in table 1-2. Specifications for

the Field Communicator can be found in the product

manual for the Field Communicator.