Instruction Manual

Instruction Manual Supplement
D103320X012
DVC6000 SIS
January 2011
2
2. Connect the Field Communicator to the DVC6000 SIS digital valve controller. Select “Device Diagnostics” from the
Online menu as shown in figure 1.
1. Online Menu
1 Configure / Setup
3 Device Variables
DVC6000: SIS
Online
2 Device Diagnostics
3. Select Partial Stroke Test (figure 2) in the Device Diagnostics Menu.
Figure 2. Device Diagnostics Menu
3 Device Record
DVC6000: SIS
Device Diagnostics
4 Stroke Valve
5 Partial Stroke Test
1 Alert Conditions
2 Status
4. After selecting Partial Stroke Test you will be asked if you want to run the test using the Max Tvl Movement, as
shown in figure 3. If you select No, go to step 5. If you select Yes, go to step 8.
Figure 3. Max Tvl Movement
DVC6000: SIS
Run the test with these values?
Max Tvl Movement 10.0%
ABORT
ENTER
1 Yes
2 No