Manualshelf

Instruction Manual

ManualsBrandsEmerson ManualsValve InstrumentationEmerson Fisher FIELDVUEDVC6200 SIS Digital Valve Controller
12345678910
Instruction Manual Supplement
D103285X012
DVC6000 SIS
January 2011
8
 Select the Partial Stroke Test Starting Point according to the application. Remove cover to check type of relay used.
Ensure that the correct relay type is selected as this will affect the Partial Stroke Test. Verify that the actual tubing is
the same as the pneumatic hookup represented by ValveLink software. Click on Next when done.
Figure 10. SIS Setup Information
S IF PORT A IS USED FOR PRESSURE
MEASUREMENT OF SOLENOID DURING
TESTING, RELAY B SPECIAL APP SHOULD
BE CHOSEN.
S IF PORT B IS USED FOR PRESSURE
MEASUREMENT OF SOLENOID DURING
TESTING, RELAY C SPECIAL APP SHOULD
BE CHOSEN.
PNEUMATIC HOOKUP
REPRESENTATION
CHECK HERE IF CONNECTED TO LCP100
 Select Travel Sensor Motion or let the actuator move to determine the motion. Click on Next when done.
Figure 11. Travel Sensor Motion