Instruction Manual
Instruction Manual Supplement
D103285X012
DVC6000 SIS
January 2011
7
Select the Actuator Make, Model, and Size. Check the box if a Volume Booster / Quick Release is being used. Click on
Next when done.
Note
The use of a Quick Exhaust Valve (QEV) with the DVC6000 SIS is not recommended for safety instrumented system applications.
The use of a QEV in an SIS application may cause the valve to cycle or instability during partial stroke test. A Volume Booster is
recommended to improve the stroking speed.
Figure 8. Actuator Information
Enter Valve Mounting Information and the Zero Power Condition (valve position when the DVC6000 SIS has no
signal). Click on Next when done.
Figure 9. Valve Mounting Information