Instruction Manual

Instruction Manual Supplement
D103285X012
DVC6000 SIS
January 2011
17
 Verify that the test parameters are correct.
Figure 27. Verify Test Parameters
THESE VALUES ARE USED AS AN EXAMPLE
ONLY.
REFER TO PARTIAL STROKE VARIABLE IN THE
DETAILED SETUP SECTION OF THE DVC6000
SIS INSTRUCTION MANUAL (D103230X012)
FOR ADDITIONAL INFORMATION ON VALVE
TEST PARAMETERS
 Click on Run Diagnostic, then OK when you are prompted with the Warning screen.
Figure 28. Run Diagnostic
 The progress bar will be shown while the Partial Stroke Test is running.
Figure 29. Partial Stroke Test Progress