Instruction Manual

Instruction Manual
D103272X012
LCP100 Local Control Panel
November 2013
7
Figure 4. Wiring for 24 VDC External Power Configuration; Intrinsically Safe Applications
NOTE: DO NOT CONNECT THE LOOP + TERMINAL IN THE LCP100 TO THE LOOP + TERMINAL IN THE DVC6200 SIS.
THIS WILL CAUSE THE LCP100 TO UNNECESSARILY CONSUME 4 mA AT THE EXPENSE OF THE DVC6200 SIS.
SIMPLE METHOD FOR INSTALLING AN LCP100 TO AN EXISTING
DVC6200 SIS INSTRUMENT WHEN 24 VDC POWER IS AVAILABLE
SWITCH TO
24VDC POSITION
24 VDC
4‐20 mA
AUX +
AUX*
CASE GROUND
SHIELD NOT CONNECTED
TO LCP100
24VDC +
DVC6200 SIS
TERMINAL BOX
LCP100
SOURCE
24VDC *
1
1 THIS CONNECTION IS ALSO LABELED LOOP -.
LOGIC
SOLVER
OUTPUT
24VDC
(USER
SUPPLIED)
(USER
SUPPLIED)
NON-HAZARDOUS LOCATION HAZARDOUS LOCATION
INTRINSICALLY
SAFE BARRIER
INTRINSICALLY
SAFE BARRIER