Instruction Manual

Instruction Manual
D103605X012
Parts
January 2015
69
Section 7 Parts77
Parts Ordering
Whenever corresponding with your Emerson Process Management sales office about this equipment, always mention
the controller serial number. When ordering replacement parts, refer to the 11‐character part number of each
required part as found in the following parts list. Part numbers are shown for kits and recommended spares only. For
part numbers not shown, contact your Emerson Process Management sales office.
WARNING
Use only genuine Fisher replacement parts. Components that are not supplied by Emerson Process Management should
not, under any circumstances, be used in any Fisher instrument. Use of components not supplied by Emerson Process
Management may void your warranty, might adversely affect the performance of the instrument, and could cause personal
injury and property damage.
Parts Kits
Kit Description Part Number
1* Elastomer Spare Parts Kit (kit contains parts to
service one digital valve controller)
Standard 19B5402X012
Extreme Temperature option
(fluorosilicone elastomers) 19B5402X022
2* Small Hardware Spare Parts Kit (kit contains parts
to service one digital valve controller) 19B5403X012
3* Seal Screen Kit [kit contains 25 seal screens (key 231)
and 25 O‐rings (key 39)]
Standard and Extreme Temperature option
(fluorosilicone elastomers) 14B5072X182
4* Terminal Box Kit (see figure 7‐1)
Note
Use only with replace in-kind. The following terminal boxes are
compatible only with PWB Assembly electronics hardware revision 2
(HW2).
Aluminum, without I/O Package
Standard Temperature (nitrile elastomers) 19B5401X142
Extreme Temperature (fluorosilicone elastomers 19B5401X152
Aluminum, without I/O Package, Natural Gas Approved
Standard Temperature (nitrile elastomers) 19B5401X162
Extreme Temperature (fluorosilicone elastomers 19B5401X172
Aluminum, with I/O Package
Standard Temperature (nitrile elastomers) 19B5401X182
Extreme Temperature (fluorosilicone elastomers) 19B5401X192
Stainless Steel, with I/O Package,
Extreme Temperature (fluorosilicone elastomers) 19B5401X202
Figure 7‐1. Terminal Box
WITHOUT I/O PACKAGE
WITH I/O PACKAGE
Key Description
50 PWB Assembly (HW2) (see figure 7‐2 and 7‐4) for DVC6200 and
DVC6205
Note
The following PWB Assemblies are compatible only with the terminal
boxes shown in figure 7‐1. Contact your Emerson Process Management
sales office if a replacement PWB is needed.
Hardware Revision 2 (HW2), without I/O Package
For instrument level HC
For instrument level AD
For instrument level PD
For instrument level ODV
Hardware Revision 2 (HW2), with I/O Package
For instrument level HC
For instrument level AD
For instrument level PD
For instrument level ODV
*Recommended spare parts