Instruction Manual

Instruction Manual Supplement

D103639X012

DVC6200 Digital Valve Controller

August 2014

Published Data, used for the Gateway’s OPC and Modbus outputs, falls into the following categories:

Field Device Identification Values:

Values that define the identity of the DVC6200. These include:

D MANUFACTURER (for “Fisher Controls” the value is “19”)

D DEVICE_TYPE (for a DVC6200 the value is “9”)

D DEVICE_REVISION

D HARDWARE_REVISION

D SOFTWARE_REVISION

D DEVICE_ID

D UNIVERSAL_REVISION (HART version)

D REQUEST_PREAMBLES

D RESPONSE_PREAMBLES

Variable information:

The Gateway receives updates concerning the DVC6200’s configured device variables. The information for any given

device variable is displayed by:

1. Dynamic Variable indicator (“PV”, “SV”, etc.)

2. The Device Variable ID number assigned to that Dynamic Variable

3. By the Device Variable Name (only if the Gateway has version 4.4 firmware or later)

Dynamic Variable Device Variable ID Device Variable Name(s)

Analog Input PV 0* ANALOG_INPUT

Internal Temperature 1 INTERNAL_TEMPERATURE

Pressure TV 2* PRESSURE_PORT_A

Travel 3 TRAVEL

Drive Signal 4 DRIVE_SIGNAL

Pressure 5 PRESSURE_PORT_B

Travel Setpoint 6 TRAVEL_SETPOINT

Pressure 7 DIFFERENTIAL PRESSURE

Pressure 8 SUPPLY_PRESSURE

Implied Valve Position SV 9* IMPLIED_VALVE_POSITION

Travel QV 10* PRIMARY_FEEDBACK

Milliamp Current 245 CURRENT

*Default Value indicated