Instruction Manual

Parts
April 2014
Instruction Manual
D103176X012
78
Description Part Number
Feedback Array Kit (cont'd)
Rotary
[kit contains feedback assembly, pointer, and travel indicator
scale]. Stainless steel kits only for use with stainless steel
mounting kits.
Aluminum GG10562X012
Stainless steel GG10562X022
Elastomer Kit - includes all accessible elastomers
for one complete DVC2000 unit GE08917X012
Small Hardware Kit -includes all fasteners and plugs
(except mounting hardware) for one
complete DVC2000 unit GE08918X012
High Temperature Gasket Set
Includes O-ring seal (qty 1) and insulation
gaskets (qty 2) GE26550X012
Replacement housing
Plastic Vent Construction
Housing A (for GX Actuator)
G 1/4 & M20 Metric threaded ports GE24013X012
1/4 NPT & 1/2 NPT Imperial threaded ports GE24011X012
Housing B (for nonGX Rotary and Sliding-Stem)
G 1/4 & M20 Metric threaded ports GE24012X012
1/4 NPT & 1/2 NPT Imperial threaded ports GE24010X012
Metal Vent Construction
Housing A (for GX Actuator)
G 1/4 & M20 Metric threaded ports GE24013X022
1/4 NPT & 1/2 NPT Imperial threaded ports GE24011X022
Housing B (for nonGX Rotary and Sliding-Stem)
G 1/4 & M20 Metric threaded ports GE24012X022
1/4 NPT & 1/2 NPT Imperial threaded ports GE24010X022
Metal Vent Assembly GE20435X012
Parts List (refer to figures 7‐1,
7‐2 and 7‐3)
Note
The parts contained in the Parts List are not available as individual
components. All parts are included in the Parts Kits.
Terminal Board Assembly
(1)
Key Description
4 Feedback Sensor & Termination Boards , with Options
11 Fasteners
15 Fastener
Key Description
24 Conductive Gasket (PWB)
29 Conductive Gasket (Shield)
30 Fastener
32 O-ring seal
36 Terminal Barrier
42 Fasteners
43 Interconnect and I/P Boards
Main Board Assembly
Note
Contact your Emerson Process Management sales office for Main Board
Assembly FS Numbers.
15 Fasteners
16 Pressure Sensor Seal
35 Main Board with LCD and Pushbuttons
I/P Converter Assembly
(2)
25 Fasteners
26 O-Ring
41 I/P Converter
231 Screen O-Ring
Relay Assembly
(3)
2 Relay
45 O-Rings
Mounting Frame Assembly
(4)
3 Mounting Frame
16 Pressure Sensor Seal
19 Fasteners
45 O-Ring
51 O-Ring
EMI Shield Assembly
(5)
11 Fasteners (3 req'd)
29 Conductive Gasket (Shield)
37 Primary Shield
1. All parts included in the Terminal Board Kits
2. All parts included in the I/P Converter Kit
3. All parts included in the Low Pressure or High Pressure Relay Kits
4. All parts included in the Mounting Frame Kit
5. All parts included in the EMI Shield Kit