Instruction Manual

Instruction Manual
D103176X012
Installation
April 2014
13
Figure 2‐4. Air-to-Open Magnet Array Alignment
W9220
ALIGNMENT
TEMPLATE
LINE UP WITH UPPER
EXTREME OF VALID
TRAVEL RANGE
Figure 2‐5. Air-to-Close Magnet Array Alignment
ALIGNMEN
T
TEMPLATE
W9221
LINE UP WITH
LOWER
EXTREME
OF VALID TRAVEL
RANGE
7. Mount the digital valve controller to the mounting bracket, using the mounting bolts. See figure 2‐6.
8. Check for clearance between the magnet assembly and the DVC2000 feedback slot. The magnet assembly should
be positioned so that the index mark in the feedback slot of the DVC2000 housing is within the valid range on the
magnet assembly throughout the range of travel. See figure 2‐2.
9. Install tubing between the actuator casing and the pneumatic positioner output connection that has the arrow
pointing away from the opening. See figure 2‐7.
Figure 2‐6. Mounting Holes for Linear Actuators
W9015
M8 THREADED
MOUNTING
HOLES
Figure 2‐7. Conduit and Pneumatic Thread Variations
W9016
ARROW P0INTING
AWAY FROM PORT =
OUTPUT TO ACTUATOR
ARROW P0INTING
TOWARDS THE PORT =
AIR SUPPLY IN
1/4 NPT
PNEUMATIC
CONNECTIONS
G1/4
PNEUMATIC
CONNECTIONS