Instruction Manual

Index
April 2014
Instruction Manual
D103176X012
105
Pressure Sensor Failure, 51, 62
pressure signal, 84
Pressure Units, 29, 42
Principle of Operation, 83
drive signal, 83
input signal, 83
pneumatic output signal, 84
pressure signal, 84
Protection, 40
Q
Quick Setup, via Local Interface, 26
R
Record Group Enab, 50
Ref Voltage Fail, 51
Limit, Reference Accuracy, 6
Reference Voltage Failure, 51, 62
relay pressure range, 72
Replace Main Board, 35
Restart Control Mode, 38
Restarting the Instrument, 38
Reverse Polarity Protection, 5
Revision Information, DVC2000
Device, 60
Firmware, 60
HART Universal, 60
RTN, Russian, Certification, 6
S
Sec Elec Rev, 60
Secondary Electronics
Assembly, 69
Removal, 68
Replacing, 68
Secondary Electronics Revision, 60
Self Test Failures, Displaying Status, 62
Self Test Failures for instrument shutdown, 51
Serial Number
Instrument, 42
Valve, 42
Set Point Filter Active, 63
Set Point Filter Time, 45
Setting Alerts, 50
Setting Response, 44
Shaft Rotation, 6
Shutdown Activated, 35
Special Instructions for ”Safe Use” and Installations in
Hazardous Locations, 9
Specifications, 5
Status Information, 23
Stem Travel, 6
Stroke Valve, 65
Supply Connections, 19
Supply Pressure, Displaying Value, 59
Switch #1
Trip Point, 31, 52
Closed, 31, 52
Switch #2, Trip Point, 31, 52
Switch #2 , Closed, 31, 52
SWITCH 1 ???, SWITCH 2 ???, 35
Switches, 52
T
Temp Comp Fail, 51
Temp Sensor Fail, 51
Temperature Compensation Fail, 51
Temperature Limits, 5
Temperature Sensor Failure, 51, 62
Temperature Units, 42
Transmitter, 6, 30, 52
Fault Indication, 6
Reference Accuracy, 6
Supply Voltage, 6
Transmitter Action, 52
Transmitters, 52
Transmitters/Switches, 52
Travel, 59
Displaying Value, 59